Recommend a cordless impact wrench
Discussion
Anyone use a cordless impact wrench? I've been looking at a compact DeWalt one but I have no idea whether it will be any good or whether it will last. Comes to around £230 with battery and charger, it will mostly be used for removing wheel nuts.
Here's the one on amazon (note it's not got a battery or charger so need to add another £60 and £35)
And here's another one that looks similar
Any recommendations before I buy?
Here's the one on amazon (note it's not got a battery or charger so need to add another £60 and £35)
And here's another one that looks similar
Any recommendations before I buy?
For wheel nuts you want impact wrench not impact driver, like your second link. You want 1/2 inch drive chuck IMO so you can use decent 1/2 inch drive impact sockets.
I'm looking at buying a Makita one, as I've already got a few of their tools so need don't the battery/charger
I've heard good reports bout the Clarke one from Machine Mart though. Depends on your budget I guess, I'd love the SnapOn version but that's way over my DIY-ers budget! Bloody good piece of kit though.
I'm looking at buying a Makita one, as I've already got a few of their tools so need don't the battery/charger
I've heard good reports bout the Clarke one from Machine Mart though. Depends on your budget I guess, I'd love the SnapOn version but that's way over my DIY-ers budget! Bloody good piece of kit though.
RobinOakapple said:
Most of my cordless stuff is Makita
Same here for home DIY type tools but I think you have to use them quite a lot to make them worth the initial premium and if I was using garage tools that much I would be installing a compressor and using air (which is what I've done). The £100 Clarke one from Machine Mart is a good budget choice. It will undo wheel nuts easily enough. The downside is that it is quite heavy and uses NiCad batteries. Mine has finally died so I have just purchased a De Walt DCF880. You can get it as a bare unit or in a pack with charger and 2 batteries. A friend has had one for 10 years and it's still going strong. It is fine for alloy wheel changing and is much lighter than the Clarke one. It also gets a good rating in the AutoExpress impact wrench review.
ryanthescot said:
Anyone use a cordless impact wrench? I've been looking at a compact DeWalt one but I have no idea whether it will be any good or whether it will last. Comes to around £230 with battery and charger, it will mostly be used for removing wheel nuts.
Here's the one on amazon (note it's not got a battery or charger so need to add another £60 and £35)
And here's another one that looks similar
Any recommendations before I buy?
Amazon do a Dewalt heavier duty impact wrench for £160 bare unit..Here's the one on amazon (note it's not got a battery or charger so need to add another £60 and £35)
And here's another one that looks similar
Any recommendations before I buy?
That's the one you want,not the lighter duty one in your link..
Now I'm definitely not a Snap-On fan boy, in fact far from it but I can't see past their impact guns, mine is a few generations old now (bought second hand from the US for around £180) and the batteries are starting to discharge a bit quicker but it'll still take off most things I need it too. I'm contemplating buying a newer one but we'll see.
I'd rate the Sealey ones highly too however they're not cheap either, though IMO this is an area that you get what you pay for.
I'd rate the Sealey ones highly too however they're not cheap either, though IMO this is an area that you get what you pay for.
Have used a cheap & cheerful Clarke one & a ~250Nm Makita one at work, both 18V rechargeable. The Clarke one does a great job but is heavy & a bit unwieldy for use in confined spaces. Makita wasn't quite so powerful but still more than enough for normal wheel nut type applications & was nicer in the hand to use. There is a more powerful 450Nm Makita job is, but that means a bigger heavier tool. I generally pick up the smaller Makita unit.
Got 2 of these at work, only problem is the battery's started to go after a year.
http://www.ebay.co.uk/itm/Sealey-Tools-CP2400-24V-...
http://www.ebay.co.uk/itm/Sealey-Tools-CP2400-24V-...
Ok thanks for everyone's input. I was looking at the smaller one as it seems to be reasonably discounted and would be better for getting into tighter areas, but the main thing I want one for is getting wheel nuts off so I'll probably just get a bigger one.
Found a Milwauke one on Gumtree for a reasonable price - http://www.gumtree.com/p/power-tool-drills/milwauk...
Anyone used one of these? Looks like it would be up to the job...
Found a Milwauke one on Gumtree for a reasonable price - http://www.gumtree.com/p/power-tool-drills/milwauk...
Anyone used one of these? Looks like it would be up to the job...
Gassing Station | General Gassing | Top of Page | What's New | My Stuff



