Diagnostic code readers
Diagnostic code readers
Author
Discussion

UK345

Original Poster:

441 posts

189 months

Sunday 12th April 2015
quotequote all
The ABS light is on in my car which is a tad annoying. I've been looking into code readers on ebay (the first ones that appear when you search engine diagnostic equipment they are about £15 posted). Are these code readers capable of resetting abs lights and clearing the light from the dash ? Is it just a case of me deleting the fault code and that will make the light vanish ?

Cheers

Pesty

42,655 posts

287 months

Sunday 12th April 2015
quotequote all
What car?

I've found mini and bmw don't always work at resetting all codes.

Most other cars do work resetting mil codes even on the cheap readers.

Yes usually it's just a couple of button presses but again it all depends. Recently Couldnt do a 1 series that had a fault linked to an air bag but in fact was something to do with the battery. A bmw specific reader reset that.

UK345

Original Poster:

441 posts

189 months

Sunday 12th April 2015
quotequote all
Thanks for the reply. The car is a 2004 ford fiesta. When the light first came on it flashed up and then ever since it's been permanent. I tried cleaning the abs sensors but the light still appeared. I also tried disconnecting the battery.

So these code readers can they reset abs lights and other lights too ? They seem to all say they can reset engine management lights but don't mention other lights.

UK345

Original Poster:

441 posts

189 months

Sunday 12th April 2015
quotequote all
Thanks for the reply. The car is a 2004 ford fiesta. When the light first came on it flashed up and then ever since it's been permanent. I tried cleaning the abs sensors but the light still appeared. I also tried disconnecting the battery.

So these code readers can they reset abs lights and other lights too ? They seem to all say they can reset engine management lights but don't mention other lights.

UK345

Original Poster:

441 posts

189 months

Sunday 12th April 2015
quotequote all
Thanks for the reply. The car is a 2004 ford fiesta. When the light first came on it flashed up and then ever since it's been permanent. I tried cleaning the abs sensors but the light still appeared. I also tried disconnecting the battery.

So these code readers can they reset abs lights and other lights too ? They seem to all say they can reset engine management lights but don't mention other lights.

rswift

1,181 posts

206 months

Sunday 12th April 2015
quotequote all
Most of the cheaper ones only do P codes (power train) so they will re-set EML lights and read relevant fault codes to the engine, but not airbag/ABS etc lights

imagineifyeswill

1,250 posts

197 months

Sunday 12th April 2015
quotequote all
I wouldnt think any of the cheap code readers would read the abs system, they,ll be engine management only, I use a Snap On micro scan £200 and that does engine only. You can buy ABS only code readers but I would imagine £70-£80 would be the cheapest, I bought a Sykes Pickavant EPB reset scanner and that will read ABS systems but only on the models with EPB and that was£250 +vat.

MrAverage

844 posts

158 months

Sunday 12th April 2015
quotequote all
i own a few cheap code readers, i know for a fact that the VAG one i have will read and reset codes for everything.

i have another that i paid around £7 inc postage and this has reset a few lights but off the top of my head i dont think it can do airbag/abs. I dont have a vehicle to plug it into at the mo (so i cant check!)

if you have a laptop this one may be worth a punt: http://www.ebay.co.uk/itm/Ford-F-SUPER-diagnostic-...

Edited by MrAverage on Sunday 12th April 10:49

DrDeAtH

3,706 posts

263 months

Sunday 12th April 2015
quotequote all
You will probably need IDS to reset the airbag fault.
You can pick that up for around £100 on eBay or obd2tool.co.uk

Andy665

4,222 posts

259 months

Sunday 12th April 2015
quotequote all
I'm amazed no one has raised the obvious - if there is an ABS fault no code reader and no amount of "clearing" will extinguish the light

Mopar440

410 posts

143 months

Sunday 12th April 2015
quotequote all
Andy665 said:
I'm amazed no one has raised the obvious - if there is an ABS fault no code reader and no amount of "clearing" will extinguish the light
Exactly.

The light may go out because you have "cleared" it, but start the engine and drive off and the light will come back on. "Clearing" the light does not cure the fault for you.

But the code reader will also bring up a fault code, which may point you in the direction of where the fault is, and you can then fix it.


Andyjc86

1,149 posts

180 months

Sunday 12th April 2015
quotequote all
ABS systems run a self check every time you switch the ignition on. If the light stays on then you have a fault somewhere.

Mopar440

410 posts

143 months

Sunday 12th April 2015
quotequote all
Andyjc86 said:
ABS systems run a self check every time you switch the ignition on. If the light stays on then you have a fault somewhere.
Yes, the very definition of "on board diagnostics", covering all the vehicle systems, not just ABS.


oilslick

975 posts

217 months

Sunday 12th April 2015
quotequote all
MrAverage said:
i own a few cheap code readers, i know for a fact that the VAG one i have will read and reset codes for everything.

i have another that i paid around £7 inc postage and this has reset a few lights but off the top of my head i dont think it can do airbag/abs. I dont have a vehicle to plug it into at the mo (so i cant check!)

if you have a laptop this one may be worth a punt: http://www.ebay.co.uk/itm/Ford-F-SUPER-diagnostic-...

Edited by MrAverage on Sunday 12th April 10:49
Sorry to slightly derail the thread, but got a link for the VAG code reader?

anarki

794 posts

167 months

Sunday 12th April 2015
quotequote all
oilslick said:
Sorry to slightly derail the thread, but got a link for the VAG code reader?
I use this one for my 2001 S3 http://pages.ebay.com/link/?nav=item.view&id=2...

They won't work with cars that use canbus as far as I know