Weird size bolts needed...Any ideas ?
Discussion
I need 4 odd sized bolts for a steering linkage.
Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.
Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.
These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.
I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.
Does anyone know of any specialist fastener companies that stock oddities ?
Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.
Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.
These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.
I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.
Does anyone know of any specialist fastener companies that stock oddities ?
Try your local precision engineer; if they don't have it they can probably make it for you.
My local guy (CS Winter) has fabricated some amazing stuff for me over the years and only seems to charge three buttons an hour for his time.
I think he enjoys the challenge more than anything...
My local guy (CS Winter) has fabricated some amazing stuff for me over the years and only seems to charge three buttons an hour for his time.
I think he enjoys the challenge more than anything...
Captain Muppet said:
Getragdogleg said:
I need 4 odd sized bolts for a steering linkage.
Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.
Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.
These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.
I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.
Does anyone know of any specialist fastener companies that stock oddities ?
I used to get custom fasteners made all the time by a fastener company in Yarmouth when I was doing offshore stuff 15 years ago. Try calling local places and asking. You could make your bolts out of some standard M12x70 cap head screws.Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.
Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.
These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.
I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.
Does anyone know of any specialist fastener companies that stock oddities ?
Getragdogleg said:
Captain Muppet said:
Getragdogleg said:
I need 4 odd sized bolts for a steering linkage.
Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.
Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.
These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.
I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.
Does anyone know of any specialist fastener companies that stock oddities ?
I used to get custom fasteners made all the time by a fastener company in Yarmouth when I was doing offshore stuff 15 years ago. Try calling local places and asking. You could make your bolts out of some standard M12x70 cap head screws.Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.
Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.
These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.
I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.
Does anyone know of any specialist fastener companies that stock oddities ?
Krikkit said:
Are they not available through the OEM? Usually specific bolts are cheap enough to buy direct.
No, helpfully BMW decided to rivet the Giubo onto the UJs so if you change the UJs you need bolts like the ones I need. BMW don't do them, you can only get a whole assembly at many, many £s.Gassing Station | General Gassing | Top of Page | What's New | My Stuff


