Light scratches on Black Metallic Paint
Light scratches on Black Metallic Paint
Author
Discussion

IndyH

Original Poster:

43 posts

145 months

Thursday 16th April 2015
quotequote all
Morning,

Would appreciate any assistance. Got a 7 month old black (cosmos black metallic) Merc which has picked up some surface (light - non fingernail deep) scratches on the passenger rear side door, much to my dismay may i add. Looks like branch damage or grit trapped in a cloth at the local car hand wash.

To get this stuff out by hand, i am reading that Farecla G3 Professional Scratch Removal ( the kind you get at Halfords, not the professional body shop variety) is the best thing to use by far.

Anyone have any experience in using this by hand? If i use this product and it works, will it cause any damage to non target areas of the paint? Some people have mentioned a hazing which occurs over the paint, which then needs to be further treated using something else, is this the case? Will the finish require upkeep, i.e. if i dont wax the panel in the future you can tell something has been used?



wilwak

759 posts

201 months

Thursday 16th April 2015
quotequote all
I use the G3 product and find it very good. I use it with the G3 applicator pad. Easy, quick and effective.

Just use the white applicator from the twin pack. Wet it first as per the instructions.

All I do is then wax the car as normal.

I use the G3 paste quite often, every time one of my cars picks up a blemish.

The Turtle Wax Colour Magic Wax is also wonderful for a periodic wax. It hides all the swirls.

I use Colour Magic a couple of times a year on all my cars. Regular waxing is done with Dodo Juice and Turtle Wax Ice.

I'm sure there's better but these keep my cars looking very nice indeed. I have no complaints.



Edited by wilwak on Thursday 16th April 10:29

Howard-

4,964 posts

233 months

Thursday 16th April 2015
quotequote all
I presume you don't own a machine polisher. Do you know anyone who does? It's literally 10 times harder trying to remove scratches like this by hand than by machine.

In any case, you'll want to use a fine finishing polish/compound (with a different, softer pad) to finish it off and remove any polishing marks / marring, after you've used the cutting compound to get the scratches out.

IndyH

Original Poster:

43 posts

145 months

Thursday 16th April 2015
quotequote all
Would the fine compound be something like the G10 product for finishing? Interesting because a lot of people seem not to be using the G10 at all after the G3... No unfortunately dont know anyone who has a machine polisher.

swisstoni

24,256 posts

310 months

Thursday 16th April 2015
quotequote all
Don't use a hand car wash. You are just going to pick up more of these blemishes. I'm convinced modern machine car washes are better.
If you can catch your fingernail in the scratch then all you will be able to do is make the appearance of the scratch diminish, to where it might not show as much.
(the only way to fix this is to sand the clearcoat down slightly and I'm pretty sure you wont fancy that :-))
If you can't catch your fingernail then is more of a scuff and will buff out with the sort of products you are talking about. Meguiars sell scratch stuff in Halfords that is designed for hand use. You can't really damage the surrounding paint - it's all very gradual.

Howard-

4,964 posts

233 months

Thursday 16th April 2015
quotequote all
IndyH said:
Would the fine compound be something like the G10 product for finishing? Interesting because a lot of people seem not to be using the G10 at all after the G3... No unfortunately dont know anyone who has a machine polisher.
I'm not familiar with either product but on the face of it, yes it sounds like it. In general, hard cutting compounds are designed for *correction*, and the finer finishing compounds are for, well, finishing and making it look as deep and shiny as possible smile

droopsnoot

14,806 posts

273 months

Thursday 16th April 2015
quotequote all
Lots of car detailers will do this for you without the risk of making it worse, as long as you pick one that's experienced and not just added "detailing" to their sign because they think using Farecla instead of T-Cut makes them a detailer.

Personally I wouldn't be learning to use a machine polisher on a 7-month-old Mercedes.

Back when I had a better web connection and time to kill I used to while away ages looking at the detailing "before and after" threads on places like the detailingworld and Luxury4Play sites - some great cars made to look better than new.

Vacumatic

188 posts

144 months

Thursday 16th April 2015
quotequote all
http://www.detailingworld.co.uk/forum/showthread.p...

Topic here on detailing world about scratch removal

sunnydude959

907 posts

158 months

Thursday 16th April 2015
quotequote all
WOAH STOP RIGHT THERE.

Sorry to sound alarming, but Mercedes paint is very different to other cars. Most mercs have a ceramic outer coating (ceramiclear) which is this very hard outer layer of paint (the outermost bit of the clear coat) which is essentially SiO2 - You can read more about it here: http://www.autogeekonline.net/forum/hot-topics-fre...

(For those of you who don't know, Mike Phillips is a well known professional detailer who has published his own books and has his own classes etc.)

In short, you don't want to be abrading the surface of a Mercedes - you'll take that coating off, and then its all soft clear coat under there.

Wash it at home using the 2 bucket method, and stick to hand polishes that have fillers - for example, super resin polish or poorboy's black hole. You can then top it up with wax, be that cheap wax or something more fancy like swissvax!

johnS2000

458 posts

203 months

Thursday 16th April 2015
quotequote all
sunnydude959 said:
WOAH STOP RIGHT THERE.

Sorry to sound alarming, but Mercedes paint is very different to other cars. Most mercs have a ceramic outer coating (ceramiclear) which is this very hard outer layer of paint (the outermost bit of the clear coat) which is essentially SiO2 - You can read more about it here: http://www.autogeekonline.net/forum/hot-topics-fre...

(For those of you who don't know, Mike Phillips is a well known professional detailer who has published his own books and has his own classes etc.)

In short, you don't want to be abrading the surface of a Mercedes - you'll take that coating off, and then its all soft clear coat under there.

Wash it at home using the 2 bucket method, and stick to hand polishes that have fillers - for example, super resin polish or poorboy's black hole. You can then top it up with wax, be that cheap wax or something more fancy like swissvax!
A lot of sense in the above however the main problem here is the "hand car wash " !!!

Blackhole or even SRP will be washed off instantly by a "hand car wash" due to the harsh chemicals most of these places tend to use and paint damage will be inflicted by the less than optimal materials / techniques employed .

Where I to use one of these places to clean my car just once I would be looking at 2 days minimum to repair the damage !!!

Before you decide on a product to remove surface marring by third parties you really need to decide on a maintenance routine that does not include hand car washes !!

IndyH

Original Poster:

43 posts

145 months

Thursday 16th April 2015
quotequote all
sunnydude959 said:
WOAH STOP RIGHT THERE.

Sorry to sound alarming, but Mercedes paint is very different to other cars. Most mercs have a ceramic outer coating (ceramiclear) which is this very hard outer layer of paint (the outermost bit of the clear coat) which is essentially SiO2 - You can read more about it here: http://www.autogeekonline.net/forum/hot-topics-fre...

(For those of you who don't know, Mike Phillips is a well known professional detailer who has published his own books and has his own classes etc.)

In short, you don't want to be abrading the surface of a Mercedes - you'll take that coating off, and then its all soft clear coat under there.

Wash it at home using the 2 bucket method, and stick to hand polishes that have fillers - for example, super resin polish or poorboy's black hole. You can then top it up with wax, be that cheap wax or something more fancy like swissvax!
Re the Ceramiclear paint code, i have checked by cars paint code and can confirm that it does not have the cermiclear option. Apparently this has been made redundant in recent years with improved technology OR it isn't applied on my specification.

The super resin polish which you recommend might have a filler but it is also abrasive, and would wear down a layer of paint to an extent...

I will not be using a buffer myself lol, best i can do is hand wash the car myself (following the proper methods etc) but as i live in a flat with no electricity or hose pipe in the parking area, i will have to think of something!
I am visiting a Paintless dent removal guy tonight recommended by my local dealership for a tiny ding on the same door, and he says he can assess the situation for me. Likely he will do it....as it is minor i thought i will deal with it myself.



Jagfanelli

6 posts

145 months

Thursday 16th April 2015
quotequote all
Rather than start wearing away at the rest of the paintwork I prefer to use the coloured car polishes you can buy from Halfords etc and just give the affected area a quick polish each time the car is washed.

T1berious

2,683 posts

186 months

Thursday 16th April 2015
quotequote all
+1 For Black hole

Does a great job of filling in the smaller scratches on a Black 330 we own.

sunnydude959

907 posts

158 months

Thursday 16th April 2015
quotequote all
IndyH said:
Re the Ceramiclear paint code, i have checked by cars paint code and can confirm that it does not have the cermiclear option. Apparently this has been made redundant in recent years with improved technology OR it isn't applied on my specification.

The super resin polish which you recommend might have a filler but it is also abrasive, and would wear down a layer of paint to an extent...

I will not be using a buffer myself lol, best i can do is hand wash the car myself (following the proper methods etc) but as i live in a flat with no electricity or hose pipe in the parking area, i will have to think of something!
I am visiting a Paintless dent removal guy tonight recommended by my local dealership for a tiny ding on the same door, and he says he can assess the situation for me. Likely he will do it....as it is minor i thought i will deal with it myself.
What model is your car?

IndyH

Original Poster:

43 posts

145 months

Thursday 16th April 2015
quotequote all
A45

scherzkeks

4,460 posts

165 months

Thursday 16th April 2015
quotequote all
IndyH said:
Morning,

Would appreciate any assistance. Got a 7 month old black (cosmos black metallic) Merc which has picked up some surface (light - non fingernail deep) scratches on the passenger rear side door, much to my dismay may i add. Looks like branch damage or grit trapped in a cloth at the local car hand wash.

To get this stuff out by hand, i am reading that Farecla G3 Professional Scratch Removal ( the kind you get at Halfords, not the professional body shop variety) is the best thing to use by far.



Never used that, but Mequiar's ScratchX is excellent. Did the job flawlessly on mine (Obsidianschwarz). No need to wax the panel either, other than for protection.

nickfrog

25,491 posts

248 months

Saturday 18th April 2015
quotequote all
Or do it properly with a DA polisher and the least abrasive polish/pad combo to start with as to not cut too much paint and work your way up if needed.

It really depends what standards you want to achieve. Blackhole will help a little but not for very long...

Wills2

29,960 posts

206 months

Sunday 19th April 2015
quotequote all
Agreed on DA, just use a fine cutting compound and be gentle, I've done it and it's not rocket science.

Plenty of clear coat on a modern car, just watch out you don't apply too much pressure and generate too much heat especially on corners and creases in the body work.


Barchettaman

7,310 posts

163 months

Sunday 19th April 2015
quotequote all
Autoglym SRP is so mildly abrasive as for it to be a non-issue. It will most likely produce an acceptable result.

Autoglym Pain Renovator, on the other hand, is pretty harsh stuff IIRC.

Make sure the panel is absolutely clean before embarking on any paint correction, either by hand or machine. I would use a mild APC solution sprayed on a couple of times, then rinsed off (mini watering can will do) before actually touching the paint at all. Then a soft microfibre with the APC solution or a mild car shampoo to lightly clean the panel. Air dry and maybe use Windolene and a dry MF to finish.

Sounds like a right faff but it'll only take a minute and vastly reduce the chances of making it worse before you even begin.

I have successfull removed horrible scuffs and scratches in black metallic paint with wet sanding and a DA polisher and I am a right numpty when it comes to all this detailing malarky, definitely not an expert.

Before:


After:





Edited by Barchettaman on Sunday 19th April 09:20

Howard-

4,964 posts

233 months

Sunday 19th April 2015
quotequote all
^^ Nice transformation. I am so glad that my black car wasn't that bad when I bought it and that it only required very mild correction!