Buell gone again. Bit sad
Discussion
To be brutally honest, I saw they're new bikes at the NEC and there definitely was an air of unfinished business about them. Heavy, grabby clutch levers, cheap looking materials and painting. It really felt cheap overall. Comparing the finish of their £14k EBR against £10k GSXR, there was no contest, the Suzuki would have won hands down.
Shame nonetheless to see an enthusiastic manufacturer bite the dust although I'm sure we'll see Mr Buell come up with a few innovative things again.



Shame nonetheless to see an enthusiastic manufacturer bite the dust although I'm sure we'll see Mr Buell come up with a few innovative things again.
And as for the dreadful ZTL braking system, Erik should have accepted the inevitable and just fitted conventional quality components. He flogged that design uphill from day one and it really wasn't as good as they said. Yes, it might have been different, but then so is wearing a Fez...
Apparently, despite the motor coming from Austria, and being built with Metric fasteners, the rest of the bike is a hotch potch of Imperial, Whitworth and Aunt Sally sized American fixings. Mental!
There's a couple of the EBR's sitting in a showroom by me and as others have said, the quality, fit and finish is a long way from what you'd expect on a highly priced, low volume manufacturer. Aside from the Rotax engine, they are really sub standard. By comparison, the Bimota's that are there as well look exquisite with their component details and intricate machined parts. Yes, the run someone else's motor bu they package it so well it becomes a premium product
Fact is, they were a shyte product, made in a shyte way and the laws of nature have spoken. HD were right to deep six them years ago, they should of taken the hint.
Apparently, despite the motor coming from Austria, and being built with Metric fasteners, the rest of the bike is a hotch potch of Imperial, Whitworth and Aunt Sally sized American fixings. Mental!
There's a couple of the EBR's sitting in a showroom by me and as others have said, the quality, fit and finish is a long way from what you'd expect on a highly priced, low volume manufacturer. Aside from the Rotax engine, they are really sub standard. By comparison, the Bimota's that are there as well look exquisite with their component details and intricate machined parts. Yes, the run someone else's motor bu they package it so well it becomes a premium product
Fact is, they were a shyte product, made in a shyte way and the laws of nature have spoken. HD were right to deep six them years ago, they should of taken the hint.
Edited by bass gt3 on Thursday 16th April 14:57
3DP said:
That's a shame - PB magazine really rated the new EBR machine.
With KTM exiting the litre class sports bike market, that leaves only Ducati flying the flag for big V-twin sports bikes.
I thought KTM were supposed to be dropping their 1290 engine into the new RC8? Or have they officially given up the ghost on that? It's a real shame if they have. Maybe the sales figures just didn't add up. When I go to my local KTM dealer there is definitely an emphasis on the small stuff, the 125s and 390s.With KTM exiting the litre class sports bike market, that leaves only Ducati flying the flag for big V-twin sports bikes.
Sad to hear Buell down and out, again, but imo the new bikes didn't seem like such a great deal, and they've obviously struggled to sell them - although it's worth noting that even if the bikes were flying out the door, the company could still have gone under, if they just couldn't turn a profit because of their overheads. Imo, the older Buell bikes were great, when they had the air cooled HD engines and short chassis, they were different to the rest of the market. The newer EBR bikes, while apparently competent, really offered nothing over a Ducati while costing much the same price.
bass gt3 said:
And as for the dreadful ZTL braking system, Erik should have accepted the inevitable and just fitted conventional quality components. He flogged that design uphill from day one and it really wasn't as good as they said. Yes, it might have been different, but then so is wearing a Fez...
Apparently, despite the motor coming from Austria, and being built with Metric fasteners, the rest of the bike is a hotch potch of Imperial, Whitworth and Aunt Sally sized American fixings. Mental!
There's a couple of the EBR's sitting in a showroom by me and as others have said, the quality, fit and finish is a long way from what you'd expect on a highly priced, low volume manufacturer. Aside from the Rotax engine, they are really sub standard. By comparison, the Bimota's that are there as well look exquisite with their component details and intricate machined parts. Yes, the run someone else's motor bu they package it so well it becomes a premium product
Fact is, they were a shyte product, made in a shyte way and the laws of nature have spoken. HD were right to deep six them years ago, they should of taken the hint.
agreed. the only bike i have ever seen with such a poor finish was also american,the new indians are terrible close up.Apparently, despite the motor coming from Austria, and being built with Metric fasteners, the rest of the bike is a hotch potch of Imperial, Whitworth and Aunt Sally sized American fixings. Mental!
There's a couple of the EBR's sitting in a showroom by me and as others have said, the quality, fit and finish is a long way from what you'd expect on a highly priced, low volume manufacturer. Aside from the Rotax engine, they are really sub standard. By comparison, the Bimota's that are there as well look exquisite with their component details and intricate machined parts. Yes, the run someone else's motor bu they package it so well it becomes a premium product
Fact is, they were a shyte product, made in a shyte way and the laws of nature have spoken. HD were right to deep six them years ago, they should of taken the hint.
Edited by bass gt3 on Thursday 16th April 14:57
wc98 said:
agreed. the only bike i have ever seen with such a poor finish was also american,the new indians are terrible close up.
Yea? My chief has an exemplary finish and fit, and detailing second to none. The accessories are also all top quality. There is absolutely no flaw or quality shortcut in the bike as far as I can see 1 year and 4000 miles on from purchase. What in particular did you think wasn't great?Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


