Gen-f bimodal exhaust override

[R8VXF]

I am currently working with some Aussies on a better switched solution, but for now it is very easy to permanently override the exhaust so it stays open. Under the engine cover on the drivers side is a small plastic non-return valve that you can easily remove and re-install reversed. Takes all of two minutes to do. I will get some pictures up later.

[Tattooboy]

Just speak to Tim at WPUK, he'll make a loom up and fit a switch no problems.

But to be honest, since I've had mine fitted, the only time I've used it is to show other people

[R8VXF]

I don't want to route any wires into the cabin, plus I like working out these things myself

[Tattooboy]

I worked my switch out on my own..............

I worked out that it'll be better to get someone else to do it for me !!

How are you thinking of switiching it if you're not planning on running wires into the cabin?

Think you'll be more than happy with the sound just reversing the valve and leaving it on loud

[R8VXF]

By using a remote keyfob

Went for a drive last night and it can get a bit droney when cruising, plus with early mornings I don't want to ps off the neighbours too much