Off to see the wizard, the wonderful wizard of...

[NickM450]

... of mapping

Just had a reply from Joolz, he's agreed to do the mapping on my car

After a fair old while of being Chim-less and a bit of a 'mare I was getting slightly disheartened, this modding thing can take it out of you at times

Anyway, after a few back and forths with Joolz I've just arranged a date and booked a transporter, 3 hours each way from my house

Can't wait to get back out there

[QBee]

Make sure you have his mobile number with you.
His workshop isn't particularly easy to find.
Basically, onto the industrial estate, and be looking to turn right part way along, then right again, as his workshop door faces away from the main thoroughfare.
His is either the last, or next to last, one in the row.

[phazed]

Most importantly, there is a Burger King down the road if you are going to be there for a while

[SILICONEKID345HP]

Get to the back of he queue ,mines in there at the moment .. no pushing in

[Alexdaredevils]

Spill the beans Daz!

[SILICONEKID345HP]

Alexdaredevils said:

Spill the beans Daz!

Just a 3bar regulator and a part remap but I`m looking at different heads ,my Stage 4`s must have some value .

[Alexdaredevils]

SILICONEKID345HP said:

Just a 3bar regulator and a part remap but I`m looking at different heads ,my Stage 4`s must have some value .

Just have the stage 4's reworked?

[SILICONEKID345HP]

Alexdaredevils said:

Just have the stage 4's reworked?

I thought there would not be enough material left .

[roseytvr]

SILICONEKID345HP said:

Get to the back of he queue ,mines in there at the moment .. no pushing in

Oi mines been there three weeks, hope you haven't pushed in Daz!! Hoping to pick it up early next week with all my problems sorted

Alex - hows progress mate, any developments??

[macdeb]

phazed said:

Most importantly, there is a Burger King down the road if you are going to be there for a while

Burger King?
I would rather go hungry [and have done] on principle than eat there, as it was they who tried to get staff to 'clock off' when the place was empty and 'clock back on' if a customer came in. wkERS!!!
Take sandwiches.
back on topic

[Alexdaredevils]

roseytvr said:

Oi mines been there three weeks, hope you haven't pushed in Daz!! Hoping to pick it up early next week with all my problems sorted

Alex - hows progress mate, any developments??

I will give you a ring soon

[NickM450]

Don't think I'm pushing in, I'm not in until the 30th

Judging by how busy he is, I'm glad I took the decision to make the journey to him

[carsy]

SILICONEKID345HP said:

I`m looking at different heads ,my Stage 4`s must have some value .

What you looking at Daz, TA`s ?

[phazed]

SILICONEKID345HP said:

,my Stage 4`s must have some value .

About a grand in good nick.

[SILICONEKID345HP]

roseytvr said:

Oi mines been there three weeks, hope you haven't pushed in Daz!! Hoping to pick it up early next week with all my problems sorted

Alex - hows progress mate, any developments??

Is that the cross over thing ?

[SILICONEKID345HP]

carsy said:

What you looking at Daz, TA`s ?

Will they bolt straight on ? how much extra flow would they give ?

[SILICONEKID345HP]

phazed said:

About a grand in good nick.

How could I work out what heads I have ? It must be the heads making the extra power .

[ChilliWhizz]

SILICONEKID345HP said:

phazed said:

About a grand in good nick.

How could I work out what heads I have ? It must be the heads making the extra power .

Ask the bloke who bolted them on?

Where they 500 heads to start with Daz?

[phazed]

SILICONEKID345HP said:

phazed said:

About a grand in good nick.

How could I work out what heads I have ? It must be the heads making the extra power .

They must be Robs Stage 4s otherwise you wouldn't be making such power.

[SILICONEKID345HP]

phazed said:

They must be Robs Stage 4s otherwise you wouldn't be making such power.

Whats the next step after stage 4`s ?