Clutch (again...)
Clutch (again...)
Author
Discussion

kris450

Original Poster:

740 posts

223 months

Sunday 3rd May 2015
quotequote all
Sorry, know this has been done many times before but was hoping we could get some up to date responses.

Any ideas on how much a garage would charge to change a clutch ? £800 ? £1000 ?

The action on the pedal is getting a bit heavier as I assume the clutch wears and I primarily want to change the fork (the actual clutch still feels ok, no slipping at all). Only issue is I can't do it at home as I just don't have the access with only axle stands. Just spent most of the morning under the car and I can't get a decent enough angle to get my hand in through the bell housing to all the necessary bits.

If I get someone else to do it (fork) then it seems only wise to do the clutch as well as everything is apart. Car has done just over 60k miles and the clutch is original. I'm also planning on doing around 2k miles round Europe next month after Le Mans and I really don't fancy getting stranded half way up a mountain in Switzerland...

QBee

22,468 posts

173 months

Sunday 3rd May 2015
quotequote all
He's in Surrey, folks.....which he forgot to tell you.
(I was just checking, as I know who I would ask around my way)

portzi

2,336 posts

204 months

Sunday 3rd May 2015
quotequote all
QBee said:
He's in Surrey, folks.....which he forgot to tell you.
(I was just checking, as I know who I would ask around my way)
Sorry Kris you will be paying London tax on that clutch fitment as I myself that after living in Surrey these last 12 months, is a rip off compared to the east mids.

I know too who I would be using in the east mids they have just changed names I believe???smile

kris450

Original Poster:

740 posts

223 months

Sunday 3rd May 2015
quotequote all
portzi said:
QBee said:
He's in Surrey, folks.....which he forgot to tell you.
(I was just checking, as I know who I would ask around my way)
Sorry Kris you will be paying London tax on that clutch fitment as I myself that after living in Surrey these last 12 months, is a rip off compared to the east mids.

I know too who I would be using in the east mids they have just changed names I believe???smile
Yeah, thats what I'm afraid of.

Ani ideas what a garage would charge if I source the clutch myself ?

portzi

2,336 posts

204 months

Sunday 3rd May 2015
quotequote all
kris450 said:
portzi said:
QBee said:
He's in Surrey, folks.....which he forgot to tell you.
(I was just checking, as I know who I would ask around my way)
Sorry Kris you will be paying London tax on that clutch fitment as I myself that after living in Surrey these last 12 months, is a rip off compared to the east mids.

I know too who I would be using in the east mids they have just changed names I believe???smile
Yeah, thats what I'm afraid of.

Ani ideas what a garage would charge if I source the clutch myself ?
Sorry Kris l can't recommend anyone down here l'm in Ashtead. I got my clutch done at Nottingham str8 six 3 years ago and l don't have my receipts to hand.

phazed

22,464 posts

233 months

Sunday 3rd May 2015
quotequote all
My son can do your clutch, PM me if interested.

kris450

Original Poster:

740 posts

223 months

Sunday 3rd May 2015
quotequote all
phazed said:
My son can do your clutch, PM me if interested.
Thanks Peter. PM sent.

portzi

2,336 posts

204 months

Monday 4th May 2015
quotequote all
kris450 said:
phazed said:
My son can do your clutch, PM me if interested.
Thanks Peter. PM sent.
Looks like your sorted Kris. I found my receipt from 2010 !!!!!
Mileage 72323.
Parts from TVRPARTS.COM = 288.83
Clutch cover
Clutch plate
Clutch release bearing

Total bill with fitting 494.00.

That was stra8 six notts.


Mark

kris450

Original Poster:

740 posts

223 months

Monday 4th May 2015
quotequote all
portzi said:
kris450 said:
phazed said:
My son can do your clutch, PM me if interested.
Thanks Peter. PM sent.
Looks like your sorted Kris. I found my receipt from 2010 !!!!!
Mileage 72323.
Parts from TVRPARTS.COM = 288.83
Clutch cover
Clutch plate
Clutch release bearing

Total bill with fitting 494.00.

That was stra8 six notts.

Mark
Indeed ! Thanks for the above info.

Peter, have messaged you again this morning. Many thanks for the kind offer.

As it turns out went back to the garage yesterday afternoon and have now managed to remove the original arm through the bell housing. I can also confirm I should be able to afford a trip round the world now with the massive additions to the swear jar... What an awkward job. Just need to fit the new arm now !

Below pic is of the original. Looks like I made the right decision I reckon as I think the pivot wasn't far away from punching through.



phazed

22,464 posts

233 months

Monday 4th May 2015
quotequote all
OK.

Good luck with the trip, jealous, moi!