Standard speaker wire in walls but Bose Accoutimass system!

[YRRunner]

I have standard speaker wire already channelled into the walls where I live, but my surround sound system is Bose Accoutimass 15 with the Bose specific connectors. Can anybody give me some advice on what I can do? Are connectors available to convert the speaker wire ends to plug into the cubes and sub? Thank you in advance for knowledgeable replies.

[Frances The Mute]

Can you post a picture of the connectors?

[JimbobVFR]

If I had the same issue I'd probably cut the connecters off and solder them on to the installed cable.

[Nelly9]

Think cubes on AM15 can be connected with bare wire,
At the Sub bose do an adaptor that has the phono connections into sub with an adaptor block that you can attach bare speaker wires into.

[F18RSC]

Be aware the Bose system has a wifi system that needs to connect the amp to the sub before it will work. Make sure you keep all the system within 10m without walls. The connectors are just twin wire connections.

[Nelly9]

F18RSC said:

Be aware the Bose system has a wifi system that needs to connect the amp to the sub before it will work. Make sure you keep all the system within 10m without walls. The connectors are just twin wire connections.

Nothing Wiffee about AM15, 😳think he is thinking about Soundtouch stuff....