My first try at chipping (hairspray method)
Discussion
An old kit i acquired and i decided to try basic weathering on it. Primer, Silver, hairspray then Green.
When it was nearly dry I dampened the right wing and rubbed at it, gently at first then a bit harder. Also scrapped using my thumb nail.
The left was left to dry overnight, then i did the same processes. I found i had to rub harder- naturally - and lightly used a file in parts.
I know it is probably overdone, but advice/comments welcome. Thanks

When it was nearly dry I dampened the right wing and rubbed at it, gently at first then a bit harder. Also scrapped using my thumb nail.
The left was left to dry overnight, then i did the same processes. I found i had to rub harder- naturally - and lightly used a file in parts.
I know it is probably overdone, but advice/comments welcome. Thanks
Gassing Station | Scale Models | Top of Page | What's New | My Stuff


