Chevy 5.7L - what's under inlet manifold ?
Chevy 5.7L - what's under inlet manifold ?
Author
Discussion

menostig

Original Poster:

244 posts

262 months

Thursday 3rd February 2005
quotequote all
If I were to lift the carb intake/inlet manifold away from the block, what would I see ?
- certainly water holes/ways for the cooling system
- certainly ports into heads for mixed air and fuel
- but what about any oilways into the manifold ?

Reason for asking is a minor water leak from front of intake manifold (moist to touch after a drive and leaves a small damp patch on the garage floor), but could it also mean water is leaking into the oil system from the inlet manifold ?

There's no white smoke from exhausts ever by the way.

cheers
Roger.

Paul.B

3,949 posts

293 months

Thursday 3rd February 2005
quotequote all
Yes you could be leaking water into the oil ways. Below the manifold is the V. The oil flows through here down past the cam into the sump (A simplistic version )

You MAY just need to re-torque the manifold bolts. I had this problem and this cured it.

Good luck

Paul.B

eliot

11,995 posts

283 months

Friday 4th February 2005
quotequote all
It looks like this underneath. You can see where mine was leaking on the left hand side.
Try a re-torque of your manifold bolts first, then replace the gaskets - I personally prefer FEL-PRO gaskets.



>> Edited by eliot on Friday 4th February 11:38