Discussion
yeah ..... run by Anthony Eaton - an old road rallyist mate
they only do mild steel.
for stainless you need Tyre Spot but I believe they only do that at their Scotswood depot (Newcastle)
they also do a good job.
must admit I did my own - well put it together using Jetex pipe and bends - then paid a welder to weld the bits together
they only do mild steel.
for stainless you need Tyre Spot but I believe they only do that at their Scotswood depot (Newcastle)
they also do a good job.
must admit I did my own - well put it together using Jetex pipe and bends - then paid a welder to weld the bits together
The problem with getting exhausts made up for the S is that as far as I am aware there isn't an "off the shelf" twin silencer box that will fit between the chassis rails. This means that any system made up from standard components results in compromised ground clearance. This is why TVR used the odd square section centre box. I considered making up a 'two' into 'one' back into 'two' system but in the end cut-up and rebuilt my off the shelf centre box to fit. I now rarely hit a speed bump instead of hitting all of them.
Gassing Station | S Series | Top of Page | What's New | My Stuff