Renegade Hybrids - any UK owners?
Discussion
Hi Folks, as a summer project I'm looking to use Renegade Hybrids of Las Vagas to pop a small block chevy into a 928 
Reasoning is a 928 with no engine is cheap, a small block chevy is v.cheap and the conversion kit is cheap etc etc.
I'd like to track down anyone who has done such a conversion on a RHD 928 as renegade's exhausts manifolds only work on LHD cars
thanks in advance
Ada,
Reasoning is a 928 with no engine is cheap, a small block chevy is v.cheap and the conversion kit is cheap etc etc.
I'd like to track down anyone who has done such a conversion on a RHD 928 as renegade's exhausts manifolds only work on LHD cars
thanks in advance
Ada,
I doubt it. But Iguana knows a 944 that had a Rover V8 fitted.
After all, you can see why you'd ditch a four for an eight, but the 928 was already blessed by nature when it left the factory.
Good luck with the project. I am an SBC fan but you'll probably have your Chevy running before me. My project has taken about two years just to get past planning stage
After all, you can see why you'd ditch a four for an eight, but the 928 was already blessed by nature when it left the factory.
Good luck with the project. I am an SBC fan but you'll probably have your Chevy running before me. My project has taken about two years just to get past planning stage
I guess the iron block Chevy is lots heavier than 928 tho?
The all alloy rover v8 lump matey shoved in the 944, actually weighed a tad less than the porker 4 pot (light weight tubular manifolds were a big factor)
Clicky-
www.pistonheads.com/porsche/default.asp?storyId=7895
The all alloy rover v8 lump matey shoved in the 944, actually weighed a tad less than the porker 4 pot (light weight tubular manifolds were a big factor)
Clicky-
www.pistonheads.com/porsche/default.asp?storyId=7895
Gassing Station | Porsche General | Top of Page | What's New | My Stuff