Brake servo/master cyclinder replacement.
Discussion
Found brake fluid in the drivers footwell,it was coming from the brake master which resisted removal resulting in me removing the steering column,then pedal box with servo and master attached.
I'm glad I did because the leaking brake fluid has made a right mess of the pedal box but more importantly the servo.
I could see the exterior looked bad but unfortunately its also full of brake fluid...not ideal.
"Not a problem" I thought,i'll just buy an xr2i one to match the master cylinder,only ive found out its not that easy at all as they are like rocking horse poo.
Best I can find on line is £216 from TVR Parts Ltd for a part that they have had re made,before I place the order tomorrow,does anyone have any other suggestions?
Those of you that have done this job before will understand that I don't wan't to do it again in a hurry.
Cheers Paul.
I'm glad I did because the leaking brake fluid has made a right mess of the pedal box but more importantly the servo.
I could see the exterior looked bad but unfortunately its also full of brake fluid...not ideal.
"Not a problem" I thought,i'll just buy an xr2i one to match the master cylinder,only ive found out its not that easy at all as they are like rocking horse poo.
Best I can find on line is £216 from TVR Parts Ltd for a part that they have had re made,before I place the order tomorrow,does anyone have any other suggestions?
Those of you that have done this job before will understand that I don't wan't to do it again in a hurry.
Cheers Paul.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff