Seatbelt holder

[butch890]

As I'm fed up not being able to reach the seat belts on my chim I've had these made.

[butch890]

Another piccy.

[Bassfiend229hp]

I used a couple of rose joints and some hollow bar to move the top seat belt mounts forward to make the belts easier to grab ... can't find the thread but I'm sure I posted up some pics.

Phil

[ChimpOnGas]

Or these for less than £30...

http://www.ebay.co.uk/itm/MGB-AND-MIDGET-SEAT-BELT...

[OleVix]

Bassfiend229hp said:

I used a couple of rose joints and some hollow bar to move the top seat belt mounts forward to make the belts easier to grab ... can't find the thread but I'm sure I posted up some pics.

Phil

Made something similar, a bracket that moves the holder forward maybe 5 cm, the belt is more accessible and also moves more freely because its not touching the carpet

[butch890]

ChimpOnGas said:

Or these for less than £30...

http://www.ebay.co.uk/itm/MGB-AND-MIDGET-SEAT-BELT...

Moneybags!

[butch890]

ChimpOnGas said:

Or these for less than £30...

http://www.ebay.co.uk/itm/MGB-AND-MIDGET-SEAT-BELT...

Moneybags!

[Bassfiend229hp]

OleVix said:

Bassfiend229hp said:

I used a couple of rose joints and some hollow bar to move the top seat belt mounts forward to make the belts easier to grab ... can't find the thread but I'm sure I posted up some pics.

Phil

Made something similar, a bracket that moves the holder forward maybe 5 cm, the belt is more accessible and also moves more freely because its not touching the carpet

Yup - mine used to be a bit tardy at rewinding as they slide against the carpet...

Phil

[bobfather]

I made a pair of these about 5 years ago, no issues reaching the belts now

[pb450]

butch890 said:

As I'm fed up not being able to reach the seat belts on my chim I've had these made.

I like those! You don't want to start a small cottage industry, do you?

[phazed]

I've never had a problem but reaching for the belt on a SWB Shogun is a bit of a fag, ( no ghey similarity intended!).

[OleVix]

phazed said:

I've never had a problem but reaching for the belt on a SWB Shogun is a bit of a fag, ( no ghey similarity intended!).

because your arms are 5 feet long Peter

[butch890]

pb450 said:

I like those! You don't want to start a small cottage industry, do you?

J C Weldfab in Wellingborough made them for me ,contact is Mark ,good lads ,will make anything ,specialise in Exhausts and motorsport fabrication.