Oil pressure gauge, DB9

[Philip0]

My DB9 Owner Manual states the following under "Storage" to obtain oil pressure when the car is left standing;
- press and hold accelerator hard to the floor
- turn on ignition
- press and hold starter button until normal engine oil pressure is indicated on the oil pressure gauge
- Release starter button and accelerator pedal

There is no "oil pressure gauge" - so does it mean the oil pressure light should go out whilst undertaking this procedure (before starting the engine)?

[ds2000]

Yes.. crank it until the oil pressure light goes out. I only do this if the car has been standing a couple of weeks or more.

[Philip0]

ds2000 said:

Yes.. .

Thanks!