battery imobiliser alarm and stuff
Discussion
had the 100amp fuse go, it was replaced today and all seemed ok, the battery went dead after the fuse went and was charged up.
Started her earlier and all ok now the battery is dead the alarm is going mad and I cant get charge in fast enought to get her going and turn off the alarm,
any suggestions other than taking the battery out and charging and then trying again.
cheers
Started her earlier and all ok now the battery is dead the alarm is going mad and I cant get charge in fast enought to get her going and turn off the alarm,
any suggestions other than taking the battery out and charging and then trying again.
cheers
Disconnect siren(battery backup). Disconnect one side of the battery and connect a battery charger to it is where it is, charge it for a day.
Reconnect battery and siren with alarm remote handy, all should be ok.
Check fuse/charging to make sure.
>> Edited by Ribol on Thursday 10th February 23:03
Reconnect battery and siren with alarm remote handy, all should be ok.
Check fuse/charging to make sure.
>> Edited by Ribol on Thursday 10th February 23:03
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



