Rover Gauge Diagnostics
Discussion
Hi Folks,
Well eventually found the ecu diagnostic plug (it was squeezed into the side of the battery box behind another relay !) after unravelling the full loom in the footwell.
I've done one quick session using Rover Gauge and I attach the pic below. Could anybody offer a bit of feedback as to what is going on ? I have found a fault code 44 for the odd lambada sensor so have ordered a new pair compatible Nissan sensors. The MAF is showing 16% and not 32-25 % but is that the fact that I have the throttle open at 19% when I took the pic.
Cheers All
Jeremy
Well eventually found the ecu diagnostic plug (it was squeezed into the side of the battery box behind another relay !) after unravelling the full loom in the footwell.
I've done one quick session using Rover Gauge and I attach the pic below. Could anybody offer a bit of feedback as to what is going on ? I have found a fault code 44 for the odd lambada sensor so have ordered a new pair compatible Nissan sensors. The MAF is showing 16% and not 32-25 % but is that the fact that I have the throttle open at 19% when I took the pic.
Cheers All
Jeremy
Looks like you have just done a ECU reset as the long term trim values are both at 0? You will get high long term trim values if the AFM output is wrong at idle. You really cant get anything else from this as you are holding the throttle open, so you have no base reference values at idle.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff