Cerbera speed six diag port

[JimmyZZ]

Does the Cerbera have a three pin diag port like the Tuscan?
If so - where is it located?

Thanks in advance
JimmyZ

[Juddder]

Depending on the year of build there should be a 3 pin external connector from the ECU, behind the carpet in the passenger foot well

There's some pictures from my car here

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[Englishman]

Mine has a 9 pin serial D connector on the end of a wire connected to the ECU, stored on the panel over the passenger footwell.

Edited by Englishman on Monday 16th November 17:16

[JimmyZZ]

it is a August 2001 Cerbera

[Englishman]

Mine is July 2001. Suggest you find the ECU which should be on, or just behind the panel over the passenger footwell, which connector you need should be obvious then. Easy to remove the panel, just a couple of screws IIRC.

[Jhonno]

JimmyZZ said:

Does the Cerbera have a three pin diag port like the Tuscan?
If so - where is it located?

Thanks in advance
JimmyZ

Yes, I believe it will be a 3 pin plug.