Monaro Wheels

[j666eds]

Hi,

I have done some research, but just want to make sure before i bite the bullet, will these fit :

19" 8.5"
5x120
ET45

Will fit 245/35/19 tyres. The car is on coilovers.

Thanks

[ArnieVXR]

Centre bore is 69.5mm IIRC

[ArnieVXR]

Details are provided on the first page of the FAQs.

I see the offset is different, as is the width.

[gsd2000]

j666eds said:

Hi,

I have done some research, but just want to make sure before i bite the bullet, will these fit :

19" 8.5"
5x120
ET45

Will fit 245/35/19 tyres. The car is on coilovers.

Thanks

based on this calculator, the rim will stick out 9mm further.

http://www.wheel-size.com/calc/?wheel1=245-40-18X8...

One way to check is to fit some cheap spacers which work out to 9mm or even washers just for a check. then jack the wheel up

I personally think that you can make them fit but you may need a minor arch roll

When i checked mine which are 18x10 +50 on the rear, they will fit with a minor arch roll and a 265 tyre, or a full roll and a 285 tyre

My front rims are 18 x 8.5 +47 and they should fit with a 245/40/18 and maybe a very minor roll or a set of offset top mounts

I hope this helps

[Phillphill]

You should be ok, but I cant comment on how tight you will be on the inner arches, the fronts on mine are tight.

What wheel is it you are looking at?

Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.

Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber

[SturdyHSV]

Phillphill said:

You should be ok, but I cant comment on how tight you will be on the inner arches, the fronts on mine are tight.

What wheel is it you are looking at?

Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.

Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber

That looks really nice, good job

Personally I'd want the rear raised maybe 5 or 10mm possibly as it just looks a tiny smidge too low at the back for my taste and I like a slight rake, but the wheels work surprisingly well on the car

[j666eds]

Phillphill said:

You should be ok, but I cant comment on how tight you will be on the inner arches, the fronts on mine are tight.

What wheel is it you are looking at?

Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.

Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber

brought them already, should be here tomorrow. They are Borla ZZR's. Thanks for that info, hopefully they should fit!

Thanks

[MyM8V8]

Phillphill said:

You should be ok, but I cant comment on how tight you will be on the inner arches, the fronts on mine are tight.

What wheel is it you are looking at?

Im running 19 x 8.5 et35 fronts with a 235/35 and 19 x 9.5 rears with 255/35 et35.

Running coilovers aswell, i have a very slight rub on the rear during hard cornering however I can dial that out with a little camber

Have you altered/modified the arches? Nice set up, they look lightweight.

[Phillphill]

No, no changes to the arches they are 100% stock