Discussion
The handbrake lever itself does undo via two bolts to the top of the chassis accessed through the cabin (At least it does on mine)
I just took mine off prior to lifting the body off.
I am not sure if you can get at the rearmost bolt without moving the centre console backwards, I had already moved mine.
I do not know if it is possible to get at the point where the cable joins the lever by doing this - might be possible by disconnecting the handbrake cable at the hubs to allow some slack.
If the point is replacing the handbrake cable I think you would have to do as PMessling suggested.
Matt
I just took mine off prior to lifting the body off.
I am not sure if you can get at the rearmost bolt without moving the centre console backwards, I had already moved mine.
I do not know if it is possible to get at the point where the cable joins the lever by doing this - might be possible by disconnecting the handbrake cable at the hubs to allow some slack.
If the point is replacing the handbrake cable I think you would have to do as PMessling suggested.
Matt
Gassing Station | Cerbera | Top of Page | What's New | My Stuff






