Aprilia SXV 550 Build.
Discussion
Cal 550 build
Just got my bike back from Cal after a complete strip down to nuts and bolts and rebuild.It had been some time since the engine was originally sealed by Cal in 2008 so i thought it was best to do a full refresh with some of his mods and headwork with a rebuild kit from AF1 before anything gave out.At the same time the forks got rebuilt with heavier springs fitted with SKF seals and Smart Performance fork oil.The rear shock was freshened up with a race tech 6.0kg spring fitted.We also swapped out the old steel silmoto for a nice titanium version.New oil tank and radiators plus Crispy made some nice new "Rip It" graphics with some personal touches for the STC bodywork and i spent far too much time ordering bits and pieces including plenty of bling from Supermoto Daz.
Thanks to Cal550 (Paul Cal Calvert) who has been brilliant,Crispy Designs (Christian Eldridge ) and Supermoto Daz (Darren Lee) and all at AF1 Racing. I just need riding weather now.
Spec-
Cal 550 modded and sealed engine with head work
xtrig triple clamps
brembo machined caliper to fit alpinas
brembo master cylinder
new pro taper bars
g2 thottle
acerbis super moto hand guards
Berenger clutch lever
braketech front disc /cast
16.5 alpina VDB front
5.5 17 alpina VDB rear
full titanium silmoto
short Alice Racing swing arm
mxv rear disc
STC Germany carbon body work tail section and rad covers
Carbon tank cover
Carbon fork guards
Carbon under tray
Crispy designs Rip It graphics
foot rest risers
Titanium raptor pegs with sliders
Alice Racing alloy tank cap
vdb seat
Pipercross air filter
K&N oil filter
high current starter motor cable kit
HEL Brake lines
Motul brake fluid
shorai battery
Alice Racing kitted rear shock
race tech 6.0KG rear spring
OE heavy 0.5kg front fork springs
SKF fork seals
SMART Performance fork oil
carbon heat shield underseat
iridium spark plugs
magnetic oil plug
oversize radiators
new instrument panel (speedo etc)
new hour meter
new headset bearings
carbon rear mud guard
anodised zeta bling (rear brake clevis etc etc)
Motorex engine oil
Motorex gear oil
Gold speed tyres
CRG mirrors

Just got my bike back from Cal after a complete strip down to nuts and bolts and rebuild.It had been some time since the engine was originally sealed by Cal in 2008 so i thought it was best to do a full refresh with some of his mods and headwork with a rebuild kit from AF1 before anything gave out.At the same time the forks got rebuilt with heavier springs fitted with SKF seals and Smart Performance fork oil.The rear shock was freshened up with a race tech 6.0kg spring fitted.We also swapped out the old steel silmoto for a nice titanium version.New oil tank and radiators plus Crispy made some nice new "Rip It" graphics with some personal touches for the STC bodywork and i spent far too much time ordering bits and pieces including plenty of bling from Supermoto Daz.
Thanks to Cal550 (Paul Cal Calvert) who has been brilliant,Crispy Designs (Christian Eldridge ) and Supermoto Daz (Darren Lee) and all at AF1 Racing. I just need riding weather now.
Spec-
Cal 550 modded and sealed engine with head work
xtrig triple clamps
brembo machined caliper to fit alpinas
brembo master cylinder
new pro taper bars
g2 thottle
acerbis super moto hand guards
Berenger clutch lever
braketech front disc /cast
16.5 alpina VDB front
5.5 17 alpina VDB rear
full titanium silmoto
short Alice Racing swing arm
mxv rear disc
STC Germany carbon body work tail section and rad covers
Carbon tank cover
Carbon fork guards
Carbon under tray
Crispy designs Rip It graphics
foot rest risers
Titanium raptor pegs with sliders
Alice Racing alloy tank cap
vdb seat
Pipercross air filter
K&N oil filter
high current starter motor cable kit
HEL Brake lines
Motul brake fluid
shorai battery
Alice Racing kitted rear shock
race tech 6.0KG rear spring
OE heavy 0.5kg front fork springs
SKF fork seals
SMART Performance fork oil
carbon heat shield underseat
iridium spark plugs
magnetic oil plug
oversize radiators
new instrument panel (speedo etc)
new hour meter
new headset bearings
carbon rear mud guard
anodised zeta bling (rear brake clevis etc etc)
Motorex engine oil
Motorex gear oil
Gold speed tyres
CRG mirrors

Cool, are there now known upgrades/fixes for what made these motors a bit of a timebomb originally?
I have no actual experience of them but my understanding is they were pretty much a race bike with a number plate so short intervals for servicing etc. Was it just that people forgot to do the routine stuff or did they have bigger problems??
I have no actual experience of them but my understanding is they were pretty much a race bike with a number plate so short intervals for servicing etc. Was it just that people forgot to do the routine stuff or did they have bigger problems??
Yazza - The early engines were poorly sealed the later engines had a reputation for blowing head gaskets.
A great technician called Cal dedicated his work to these bikes and re-sealed most of the bikes in the UK and does some other mods to them that make them as reliable as other race supermoto's.
They are never going to need as little looking after as a KTM 690,but then again they aren't real race SM's.
Once Cal has done his mods to an SXV its reliability and servicing needs are in the same ball park as a KTM 525,Huskie or the like.
This is my second.I had an SXV450 but went to a few other Super Motards before being drawn back to the twin cylinder SXV with this 550.
The engine is addictive,there is nothing quite like it.The torque of a twin with the top end of a two stroke.
A great technician called Cal dedicated his work to these bikes and re-sealed most of the bikes in the UK and does some other mods to them that make them as reliable as other race supermoto's.
They are never going to need as little looking after as a KTM 690,but then again they aren't real race SM's.
Once Cal has done his mods to an SXV its reliability and servicing needs are in the same ball park as a KTM 525,Huskie or the like.
This is my second.I had an SXV450 but went to a few other Super Motards before being drawn back to the twin cylinder SXV with this 550.
The engine is addictive,there is nothing quite like it.The torque of a twin with the top end of a two stroke.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff





