Another production run on Cerbera rear discs?

[Brummmie]

Hi guys,

I am considering another run on rear discs, who might be interested?
It will feature a new venting arrangement which is uni directional, same as latest supercars and HGB trucks,

Can do drilled and also grooved.

[CerbWill]

I might need some. Seem to have got quite rusty this winter, though I won't know until I get my speedo back from a very un-speedy place so I can drive the car again.

[Incognegro]

Would deffo be interested... Hmmm now for rears I think drilled look best but I take it they suffer the same cracking fate as fronts? So I in that case I'd have grooved

Let me know as and when mate.

Edited to add: what size are thy mate? Will you be going to the max of 306mm and supplying spacers?

Cheers

Edited by Incognegro on Wednesday 20th January 06:53

[Brummmie]

Seems they have lasted too well!

I have to order in batches of 32 so its not worth doing.

[FarmyardPants]

Mine are lasting really well in their box in the garage

The oem's were lathed a few years ago and still fine but might fit the new ones when the pads run out.

[Alistair H.]

FarmyardPants said:

Mine are lasting really well in their box in the garage

The oem's were lathed a few years ago and still fine but might fit the new ones when the pads run out.

Ditto what he said!

[Brummmie]

Mine are still good, and have CL RC8's on them to bring rear bias up, as the Alcon 6 pots moved bias too far to the front.
But I will do a run probably next year in this case, I would like a spare set as the ones that are £400 a pair barely do a year, so don't want to get caught needing those.

[purpleliability]

I've done about 8k on mine and they look like they barely been touched! I use the CL5+

Front pads needed replacing but rears (which also had new rear callipers at the same time) are wearing very well.

[scotty_d]

+1 mine don't seem to wear at all

[Incognegro]

purpleliability said:

I've done about 8k on mine and they look like they barely been touched! I use the CL5+

Front pads needed replacing but rears (which also had new rear callipers at the same time) are wearing very well.

What fronts are you running? Now I have the 350 discs with APs on the front and CL5s on the back. I'm thinking if I put CL5 back on the front I'm going to need even more on the rear? Will put some drilled 306s on at the same time.