Dash Cam hard wiring into 5 series 2014 / F10
Dash Cam hard wiring into 5 series 2014 / F10
Author
Discussion

Plan B

Original Poster:

347 posts

156 months

Friday 4th March 2016
quotequote all
I'm in process of fitting a dash cam and intended to hardwire the power connection using a piggyback fuse on the mobile phone fuse (position 23) in the front fusebox inside the passenger glovebox. Just done a google on this topic and some guy in Korea is saying BMW electrics don't like piggy back fuses and that I should run power direct from the battery. I would prefer not to route cabling back to the boot and besides I really want the power to be switched off when leaving the car. So my question is: is the fuse piggy back a no-no on newer Beemers?? Any further advice would be appreciated.

Sump

5,512 posts

198 months

Friday 4th March 2016
quotequote all
Look for a minor fuse that is on the ignition, something like the wipers or windscreen washer, just don't piggy off something like an ABS fuse etc.

FurryExocet

3,011 posts

212 months

Friday 4th March 2016
quotequote all
I piggy backed off the cigarette lighter fuse in the glove box of my E90, I now have a second cigarette lighter in the glove box, which the dashcam uses (ran the wires down the A pillar)