Early 2005 120d - 83,000 miles - what can go wrong?
Early 2005 120d - 83,000 miles - what can go wrong?
Author
Discussion

MitchT

Original Poster:

17,167 posts

240 months

Friday 11th March 2016
quotequote all
The OH has an early 2005 120d with 83,000 miles on the clock. It's just sailed through its MOT though the clutch is on the way out and will need replacing, along with the flywheel. What else can go wrong with these cars at this age and mileage? Turbos? Those little plastic fan blade thingies that can get sucked into the engine? DPF? Anything else? It's been 100% reliable since she bought it about eight years ago, other than the electronic steering lock needing to be 're-coded' once. It was a fleet car before that so it's probably done mostly motorway miles.

She's wondering whether to replace the clutch and flywheel or to replace the car. My school of thought is keep a car running if it's serving you well, but it's also worth considering that there could be a world of massive bills just around the corner.

Any thoughts?

Mr Tidy

31,941 posts

158 months

Monday 14th March 2016
quotequote all
Nice car!

Those plastic blade thingies you mention are usually referred to as swirl-flaps, and I believe are an easy fix.

So if you get those sorted and put a clutch and flywheel in it that only leaves the turbo as a potential issue, other than routine issues like suspension bushes, batteries, tyres, exhausts, etc.

I would think it would be much cheaper to deal with the issues than the depreciation of a newer model! I should know, I bought a pre-reg 123d (facelift) in 2008 that I sold in 2014 - lost over £16K in 8 and a half years! eek

Have gone back to petrol engines now, albeit in straight 6 petrol format - so much better!

MitchT

Original Poster:

17,167 posts

240 months

Monday 14th March 2016
quotequote all
Ah yes, swirl flaps. I've read about them many times but their name escaped me when I made the post. Basically I'm in agreement with you - fix the clutch and deal with any minor issues as they arise. What's the best way to get the swirl flaps changed? Main dealer, independent, DIY?