Little help Monaro Brakes

[Monaro5.7]

Good Moring.

I just had my car mot`ed and it had a I had a slight issue with a caliper now it has been sorted but I now need a seal kit for one brake caliper. the seal kit I need is for the VXR Monaro brakes and its just one piston seal I need.

Any Advice?

[j666eds]

They standard VXR brakes or AP? If its AP i have a seal kit in my boot.

[Monaro5.7]

j666eds said:

They standard VXR brakes or AP? If its AP i have a seal kit in my boot.

Standard VXR Monaro brakes

[vxr2010]

Monkfish appear to do them ? Then it's down to pay some one or give it a go ?

[Monaro5.7]

vxr2010 said:

Monkfish appear to do them ? Then it's down to pay some one or give it a go ?

I could have the calipers overhauled for less than the kit from Monkfish as I work in the aftermarket parts game but all I need is one seal on one piston.

[vxr2010]

Would it not be better in long run to refurb the whole caliper or both , would they not be going wrong at the same time or are failures rare and random

[Monaro5.7]

vxr2010 said:

Would it not be better in long run to refurb the whole caliper or both , would they not be going wrong at the same time or are failures rare and random

I actually have a spare caliper which I might send it away just have a wedding to pay for

[Lee20k]

Monaro5.7 said:

I actually have a spare caliper which I might send it away just have a wedding to pay for

Don't you hate it when these things happen ............................ Weddings always seem to happen at the wrong time!

[motomk]

If the front is a 330mm disc then that is the same PBR caliper as a C5 Corvette if that helps. I can't find any PBR rebuild numbers online, but there is a GM number/ACDelco number.

Edited by motomk on Wednesday 23 March 22:22

[Monaro5.7]

motomk said:

Front or back?

front

[maccavvy]

ive heard of a company called big red that refurb calipers.

[motomk]

Monaro5.7 said:

front

I edited my post after you had answered.

If the front is a 330mm disc then that is the same PBR caliper as a C5 Corvette if that helps. I can't find any PBR rebuild numbers online, but there is a GM number/ACDelco number for the C5 Corvette.

[Monaro5.7]

motomk said:

If the front is a 330mm disc then that is the same PBR caliper as a C5 Corvette if that helps. I can't find any PBR rebuild numbers online, but there is a GM number/ACDelco number.


I did see that online yesterday bit was not sure if it was right but thanks for confirming that something to work with.

Edited by motomk on Wednesday 23 March 22:22