Talk to me about Coding my e91!
Discussion
Recently became the very happy owner of a rather lovely e91 335i.
I want to
a) Code in a few basic things e.g. mirrors close on key lock and open on unlock
b) Flash the Alpina B3 Trans flash.
What is the easiest way to do all of this? I am pretty technically minded and happy to wrap my head around the process properly first.
Are the eBay K+DCAN cables safe and reliable? They seem to range from 8 quid to 40 quid - what is the difference?
What is the best resource for hunting down DIY guides to each small change?
I want to
a) Code in a few basic things e.g. mirrors close on key lock and open on unlock
b) Flash the Alpina B3 Trans flash.
What is the easiest way to do all of this? I am pretty technically minded and happy to wrap my head around the process properly first.
Are the eBay K+DCAN cables safe and reliable? They seem to range from 8 quid to 40 quid - what is the difference?
What is the best resource for hunting down DIY guides to each small change?
You'll need to spend at least £30 on the cable, cheap cables don't work or work intermittently. I've got a Cable Shack cable from eBay, which come in at around £40.
I learned to code based on the DIY guides on E90Post, so worth heading over there and growing the coding section of the forum.
I'd suggest setting up a Virtual Machine (e.g. VirtualBox) to install Windows XP, as the BMW software you'll need doesn't play that well with 64 bit systems, and also good to keep a Windows XP install reserved just for coding to minimise compatibility issues.
The coding process itself involves reading different parts of the cars modules, and dumping their settings out to a text file. This text file is then edited to change settings before being reuploaded. The files are all in German, so it's worth downloading a tool called NCS Dummy, which translates the files and also provides a more user friendly way to modify.
I learned to code based on the DIY guides on E90Post, so worth heading over there and growing the coding section of the forum.
I'd suggest setting up a Virtual Machine (e.g. VirtualBox) to install Windows XP, as the BMW software you'll need doesn't play that well with 64 bit systems, and also good to keep a Windows XP install reserved just for coding to minimise compatibility issues.
The coding process itself involves reading different parts of the cars modules, and dumping their settings out to a text file. This text file is then edited to change settings before being reuploaded. The files are all in German, so it's worth downloading a tool called NCS Dummy, which translates the files and also provides a more user friendly way to modify.
FurryExocet said:
The slightly simpler option, is the BMW Carly app on android (not sure on iOS)
Get the Bluetooth adaptor and you'll be coding in minutes and it's really straight forward.
Coded my mirrors and angel eyes. The trans flash I think has to be done by a tuner
Good point - coding using the NCS Expert software has a very steep learning curve, and given the availability of apps it's probably better to go down this route. I think there's something on iOS called BMWhat.Get the Bluetooth adaptor and you'll be coding in minutes and it's really straight forward.
Coded my mirrors and angel eyes. The trans flash I think has to be done by a tuner
I've done the trans flash on mine (it's a completely different process and uses different software to normal coding), but I was crapping myself the entire time - particularly when I restarted the car and it showed a cog with a cross through it. All fine in the end, but I'd recommend just getting in touch with Makkan on E90 Post and get him to do it.
ladderino said:
Good point - coding using the NCS Expert software has a very steep learning curve, and given the availability of apps it's probably better to go down this route. I think there's something on iOS called BMWhat.
I've done the trans flash on mine (it's a completely different process and uses different software to normal coding), but I was crapping myself the entire time - particularly when I restarted the car and it showed a cog with a cross through it. All fine in the end, but I'd recommend just getting in touch with Makkan on E90 Post and get him to do it.
Did you have to hook the car up to a permanent charger whilst doing the flash?I've done the trans flash on mine (it's a completely different process and uses different software to normal coding), but I was crapping myself the entire time - particularly when I restarted the car and it showed a cog with a cross through it. All fine in the end, but I'd recommend just getting in touch with Makkan on E90 Post and get him to do it.
w1ntermut3 said:
Did you have to hook the car up to a permanent charger whilst doing the flash?
Not sure about the TCU, but I did when I installed the MHD software on my 335i. The flash lasted 45 minutes and even with pulling the fuel pump fuse (the low pressure pump is on the whole time during the flash) I was obviously concerned about the battery going!w1ntermut3 said:
ladderino said:
Good point - coding using the NCS Expert software has a very steep learning curve, and given the availability of apps it's probably better to go down this route. I think there's something on iOS called BMWhat.
I've done the trans flash on mine (it's a completely different process and uses different software to normal coding), but I was crapping myself the entire time - particularly when I restarted the car and it showed a cog with a cross through it. All fine in the end, but I'd recommend just getting in touch with Makkan on E90 Post and get him to do it.
Did you have to hook the car up to a permanent charger whilst doing the flash?I've done the trans flash on mine (it's a completely different process and uses different software to normal coding), but I was crapping myself the entire time - particularly when I restarted the car and it showed a cog with a cross through it. All fine in the end, but I'd recommend just getting in touch with Makkan on E90 Post and get him to do it.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


