Spare in a can
Author
Discussion

old phart

Original Poster:

406 posts

140 months

Sunday 17th April 2016
quotequote all
So my 'spare tire' expires in about a month. Has anyone actually used theirs? What does it do to the tire sensors?

Should I just toss it and go get a can of tire goo from the local car parts store to keep in the boot for emergencies?

DaveV8V

89 posts

128 months

Sunday 17th April 2016
quotequote all
Sorry can't advise on what it does to the tyre sensors. But I had to use mine fairly recently, and it was a fairly neat solution as you also have the compressor/gauge to inflate to the correct pressure. I had a back injury at the time (could hardly bend over), so with the length of the 12v cable and air pipe made it very easy

On my Porsche when I had a puncture and used the inflation kit it filled the tyre with fluid, and you could feel the wobble in the wheel as the fluid got flung around.

One other thing to note (read this as you will), the tyre retailer did say that some brands of tyre sealant can damage the inside of the tyre causing any attempted tyre patch not to adhere properly.

D

divetheworld

2,565 posts

165 months

Sunday 17th April 2016
quotequote all
Some latex goo can turn the tyre into a scrapper. My tyre dealer told me the Holts tyreweld stuff is the one to go for. Two big cans in the boot and forget the latex. Its a faff anyway.

dig123

347 posts

146 months

Sunday 17th April 2016
quotequote all
The tyre can is the same as the one Volvo use got mine replaced when I got the car, as it was out of date hopefully I won't need it, £25 on Amazon.

Octavarium

608 posts

137 months

Wednesday 20th April 2016
quotequote all
divetheworld said:
Some latex goo can turn the tyre into a scrapper. My tyre dealer told me the Holts tyreweld stuff is the one to go for. Two big cans in the boot and forget the latex. Its a faff anyway.
Halfords currently have an offer on Holts until early June. Two x 500ml cans for the price of one - just a tenner.

Neil1300r

5,779 posts

208 months

Thursday 21st April 2016
quotequote all
divetheworld said:
Some latex goo can turn the tyre into a scrapper. My tyre dealer told me the Holts tyreweld stuff is the one to go for. Two big cans in the boot and forget the latex. Its a faff anyway.
Have used the Holts stuff on a motorbike - Sunday morning in France - no chance of a repair. It was great. But did have to inflate the tyre at the nearest petrol station as it only gets it to ~20psi. Scrapped the tyre when back in the UK, but not keen on patching bike tyres anyway.

When the gunge in the Aston ran out I just got a Holts can for the car. Cheaper and less faff.

Zuman

188 posts

143 months

Friday 22nd April 2016
quotequote all
I bought a Dynaplug repair system from Amazon. I've never had the need for it, but it has good reviews and was recommended by a fellow Aston driver.
My thinking is that if I ever get a puncture while driving my DB9 I'll first try the Dynaplug solution, which appears to be a superior fix if I can access the puncture and it's pluggable. If I can't get to it, I'll try the goop/slime solution.

divetheworld

2,565 posts

165 months

Friday 22nd April 2016
quotequote all
Zuman said:
I bought a Dynaplug repair system from Amazon. I've never had the need for it, but it has good reviews and was recommended by a fellow Aston driver.
My thinking is that if I ever get a puncture while driving my DB9 I'll first try the Dynaplug solution, which appears to be a superior fix if I can access the puncture and it's pluggable. If I can't get to it, I'll try the goop/slime solution.
That's a neat solution. A lot cleaner than the traditional tyre plugs.

Zuman

188 posts

143 months

Friday 22nd April 2016
quotequote all
I should have noted that I bought the Dynaplug Xtreme, which many have stated is a better match for the kind of beefy tyres we tend to have on our cars...