130i - replacing run flats but confused by lack of choice
Discussion
Hey everyone,
I've not had my 130i that long and have noticed the two rear run flats need replacing. I want to go the non run flat route for obvious reasons, but when I look up the tyre sizes and speak to my local tyre place I'm getting a very limited choice available.
Looking at other threads and forums there seems to be a common solution to change the size of the tyres. But I really don't know enough aboout what difference or risk this might present. I'm worried about replacing all 4 and making the car unsafe.
So, can you please enlighten me on what my options are and what the pitfalls might be
current sizes are:
Front: 205/45/ r18 88y
Rear: 225/40 r18 88y
Also, any recommendations for a good puncture kit?
I've not had my 130i that long and have noticed the two rear run flats need replacing. I want to go the non run flat route for obvious reasons, but when I look up the tyre sizes and speak to my local tyre place I'm getting a very limited choice available.
Looking at other threads and forums there seems to be a common solution to change the size of the tyres. But I really don't know enough aboout what difference or risk this might present. I'm worried about replacing all 4 and making the car unsafe.
So, can you please enlighten me on what my options are and what the pitfalls might be
current sizes are:
Front: 205/45/ r18 88y
Rear: 225/40 r18 88y
Also, any recommendations for a good puncture kit?
Just buy them online and have them fitted in person, you'll find loads of options.
Puncture solutions from most reliable to least:
Space saver + jack (or spare winter wheel)
RAC
'Poke it in' tubeless repair kit + 9v dc pump
Can of slime eg holts tyreweld (make sure you get the 'big cars / 4x4' one, bogof at halfords atm)
Puncture solutions from most reliable to least:
Space saver + jack (or spare winter wheel)
RAC
'Poke it in' tubeless repair kit + 9v dc pump
Can of slime eg holts tyreweld (make sure you get the 'big cars / 4x4' one, bogof at halfords atm)
Getting rid of the RFts is the best thing you can do.
Don't worry about the 88Y part, as long as the new ones are that or a higher rating it doesn't matter.
Most decent tyres will be a 91 or 95Y rating.
I replaced mine around a year ago and don't carry round anything, I've got the full breakdown cover though. I keep meaning to buy the BMW mobility kit but still haven't got round to it.
Don't worry about the 88Y part, as long as the new ones are that or a higher rating it doesn't matter.
Most decent tyres will be a 91 or 95Y rating.
I replaced mine around a year ago and don't carry round anything, I've got the full breakdown cover though. I keep meaning to buy the BMW mobility kit but still haven't got round to it.
Dannbodge said:
Getting rid of the RFts is the best thing you can do.
Don't worry about the 88Y part, as long as the new ones are that or a higher rating it doesn't matter.
Most decent tyres will be a 91 or 95Y rating.
I replaced mine around a year ago and don't carry round anything, I've got the full breakdown cover though. I keep meaning to buy the BMW mobility kit but still haven't got round to it.
Thanks. Did you replace with the same size as the RFLs?Don't worry about the 88Y part, as long as the new ones are that or a higher rating it doesn't matter.
Most decent tyres will be a 91 or 95Y rating.
I replaced mine around a year ago and don't carry round anything, I've got the full breakdown cover though. I keep meaning to buy the BMW mobility kit but still haven't got round to it.
I'm not able to match them so am considering 225/40 all round which gives me plenty of choices
hotchilidamo said:
Thanks. Did you replace with the same size as the RFLs?
I'm not able to match them so am considering 225/40 all round which gives me plenty of choices
I have a 335i so my tyre sizes are different to those that you have.I'm not able to match them so am considering 225/40 all round which gives me plenty of choices
My replacements are the same width and profile but a higher load and speed rating than the rfts
I've also got a 130i, and replaced all four tyres with Goodyear eagle F1s in 225/40/18 92Y. The standard front tyres are a bit of an odd size so your easiest option is to go to a more usual 225/40. You can either run the same tyre size at each end without any issue, or go up to a 245/35 on the rear. Personally I wouldn't bother with any more rubber on the rear as it's got loads of grip anyway and the handling is fine. You're best off going for 92 load rating as the sidewalls will be a bit floppy on anything less.
The car will be much improved with proper tyres on
The car will be much improved with proper tyres on
Yep, pretty much as suggested, you either go 225/40 all round or keep the staggered set up but go wider front and rear. Personally I think 225s all round give a better handling balance, so I went with the former using Michelin pilot sport 2's, albeit that was a couple of years ago. I'd probably go for pilot super sports if I was to change them again now. Just make sure you go for an XL load rating.
silent ninja said:
If the car is tuned with RFTs in mind, surely there must be a trade-off in going with normal rubber? The suspension and associated fixtures in particular.
I have RFTs on my 430d but in all honesty, the ride is very compliant and I have no complaints.
Not that I have found yet.I have RFTs on my 430d but in all honesty, the ride is very compliant and I have no complaints.
The ride is about 200% more comfortable and I have about 100% more grip, in both wet and dry conditions.
The one part that suffers is initial turn in as RFTs have rock hard sidewalls and normal tyres don't
Dannbodge said:
silent ninja said:
If the car is tuned with RFTs in mind, surely there must be a trade-off in going with normal rubber? The suspension and associated fixtures in particular.
I have RFTs on my 430d but in all honesty, the ride is very compliant and I have no complaints.
Not that I have found yet.I have RFTs on my 430d but in all honesty, the ride is very compliant and I have no complaints.
The ride is about 200% more comfortable and I have about 100% more grip, in both wet and dry conditions.
The one part that suffers is initial turn in as RFTs have rock hard sidewalls and normal tyres don't
Heathwood said:
Dannbodge said:
silent ninja said:
If the car is tuned with RFTs in mind, surely there must be a trade-off in going with normal rubber? The suspension and associated fixtures in particular.
I have RFTs on my 430d but in all honesty, the ride is very compliant and I have no complaints.
Not that I have found yet.I have RFTs on my 430d but in all honesty, the ride is very compliant and I have no complaints.
The ride is about 200% more comfortable and I have about 100% more grip, in both wet and dry conditions.
The one part that suffers is initial turn in as RFTs have rock hard sidewalls and normal tyres don't
The first generation 1 series on run flats however is rubbish, so if there was any attempt at tuning it for run flats it wasn't down very well.
Gassing Station | BMW General | Top of Page | What's New | My Stuff



