Urgent Help Needed! BMW 116i
Urgent Help Needed! BMW 116i
Author
Discussion

Afchotboy

Original Poster:

4 posts

132 months

Sunday 24th April 2016
quotequote all
Hi guys im new here well to posting have been lurking for quite a while but didnt sign up , now i have! my 2007 BMW 116i is giving me a whole heap of trouble and i dont know where to start!? On start the Engine shakes really judders has a serious Misfire , the engine management light has Come on the screen and so has ABS light, the car also smokes alot of white Smoke is accelerated , if left to idle car will cut Out within a Minute or 2 , can be driven but not for long at All (i wouldnt drive it but it does move) i have had it plugged in and had Alot of Faults come up i hope someone can help thank you guys!

Fault Codes are
2F0D - DME: Radiator Blind (Acitivation) GLF
2EF5 DME: Map Thermostat, Activation
29CD DME: Combustion Misfires , Cylinder 1
29D9 DME: Misfire At low tank fill level
29CE DME: Combustion Misfires , Cylinder 2
29CC DME: Combustion Misfires Several Cylinders
5E70 DSC: Run Flat indicator deactived

PLEASE GUYS ANY HELP FROM YOUR MARVELLOUS GENTS WILL BE APPRECIATED THANKS GUYS!

E-bmw

13,599 posts

183 months

Sunday 24th April 2016
quotequote all
Ignore the first 2 they aren't real faults.

You need to get the misfires sorted, they are likely to be injectors or spark plugs, change the plugs & get all 4 injectors off & get them cleaned & tested, Google will help you find someone local to help.

Check all tyre pressures, reset the Tyre pressure monitor (the manual will tell you how) make sure it is reactivated, job done.

Afchotboy

Original Poster:

4 posts

132 months

Sunday 24th April 2016
quotequote all
thanks for the reply mate from what i have been reading online it could also be coil packs playing up on these would you recommend that i change the coils with the plugs before i go onto the injectors? or the codes showing could be sparks? thank you mate really appreciated

E-bmw

13,599 posts

183 months

Sunday 24th April 2016
quotequote all
I was just about to add coils to that while thinking some more, try clearing the codes, swapping the coils to those NOT misfiring & trying again.

If the codes move cylinders you need 2 coils.

E-bmw

13,599 posts

183 months

Sunday 24th April 2016
quotequote all
Alternatively Bosch coil packs £19 at eurocarparts.

2 x coils 4 x plugs £60 done..... Hopefully.

Afchotboy

Original Poster:

4 posts

132 months

Sunday 24th April 2016
quotequote all
thank you pal very much appreciated will be on it first thing in the morning! if turns out be injectors could it be a case of cleaning them etc or getting a new set?

E-bmw

13,599 posts

183 months

Sunday 24th April 2016
quotequote all
Google is your friend, have a look around local to you for "fuel injector cleaning" you will find someone who will test them, ultrasonically clean them, replace the O-rings & printle caps and retest them complete with a full written report for around £15/20 per injector.

The last set I had done even took digital pics of the spray pattern before & after.

benz2209

1 posts

100 months

Friday 27th July 2018
quotequote all
Afchotboy said:
Hi guys im new here well to posting have been lurking for quite a while but didnt sign up , now i have! my 2007 BMW 116i is giving me a whole heap of trouble and i dont know where to start!? On start the Engine shakes really judders has a serious Misfire , the engine management light has Come on the screen and so has ABS light, the car also smokes alot of white Smoke is accelerated , if left to idle car will cut Out within a Minute or 2 , can be driven but not for long at All (i wouldnt drive it but it does move) i have had it plugged in and had Alot of Faults come up i hope someone can help thank you guys!

Fault Codes are
2F0D - DME: Radiator Blind (Acitivation) GLF
2EF5 DME: Map Thermostat, Activation
29CD DME: Combustion Misfires , Cylinder 1
29D9 DME: Misfire At low tank fill level
29CE DME: Combustion Misfires , Cylinder 2
29CC DME: Combustion Misfires Several Cylinders
5E70 DSC: Run Flat indicator deactived

PLEASE GUYS ANY HELP FROM YOUR MARVELLOUS GENTS WILL BE APPRECIATED THANKS GUYS!