Porsche 993 Turbo 4 (PA 2000 Alarm problem)
Discussion
When I bought by 993 Turbo it only had one alarm fob. I contacted Hamilton & Palmer and they sold me a new control board, key fob plus red key fob, the cost was about £80. An alarm installer put it in for me and matched my original fob to the new frequency. My alarm on a 1998 car was a PA1000, I understand that the difference between that and the PA2000 is that the 2000 has self closure of the windows.
Mark - the 993 workshop manual has a few pages on how to tune in the remote transmitters and how to disable the immobiliser. Sounds like a pain in the backside, essentially entering numbers by turning the ignition on/off to communicate with the brain, but might solve your problem or at least let you start the car so that you can drive it to a specialist.
If you want the relevant pages from the PDF then give me an email address to send them to. Best of luck.
If you want the relevant pages from the PDF then give me an email address to send them to. Best of luck.
Many thanks for your advice.
I called Edward Atkinson at Hamilton Palmer in Kent. They specialise in alarm systems and have in-depth experience of Porsche alarms. Edward was very, very helpful. He advised that he could re-code the PA 1000 alarm and provide a new master key, subject to supplying the correct paperwork. All at a very reasonable price.
Thanks again.
Mark
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


