New gearbox oil choices?
Discussion
There is lots of discussion on PH about ATF vs Gear Oil, but the manufacturers recommendation and general consensus is that you should use ATF for the T5WC (which has different lubrication requirements to the T5 non WC).
I use the most expensive Fully Synth ATF I can easily buy, which is Valvoline MaxLife ATF from ECP.
The best thing I did with my gox was fit the Billet 5th Gear Stabiliser from
http://www.5speeds.com/t5.htm
It is not as easy to fit as the instructions imply (Remove 5th Gear!)
Hopefully it will stop this happening again

Interestingly he now supplies a Heavy Duty 5th Gear Set with the same 0.8 ratio
http://www.5speeds.com/t5/s80.html
I use the most expensive Fully Synth ATF I can easily buy, which is Valvoline MaxLife ATF from ECP.
The best thing I did with my gox was fit the Billet 5th Gear Stabiliser from
http://www.5speeds.com/t5.htm
It is not as easy to fit as the instructions imply (Remove 5th Gear!)
Hopefully it will stop this happening again
Interestingly he now supplies a Heavy Duty 5th Gear Set with the same 0.8 ratio
http://www.5speeds.com/t5/s80.html
Supateg said:
ATF,
I use Morris oil
+1 same here.I use Morris oil
Unfortunately, the t5 is only good 300ft/lbs.
I blew 3rd on mine
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Edited by aide on Saturday 14th May 17:08
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


