Heat SHields

[gsw500]

Need some help folks and being lazy thought I'd post it up before trawling thro the threads.
I need to source some Por15 and have it delivered before Fri morning (March 4th) gotta get dirty on the chassis..
Also I need to replace the Heat Shields need good honest suppliers for both items and of course at a reasonable cost... Have short arms and long pockets at the mo.....!
Items required for my 96 500 Serp.
Many thanks in advance for your rapid responses..

GSW500.

[JoolzB]

I got my POR15 from Frost.co.uk . I can't remember how long it took to deliver but you could give um a call.

I noticed shpub mentioned Rally Design in the starter motor thread below that mentioned heat shield

www.pistonheads.com/gassing/topic.asp?t=157616&f=9&h=0

[gsw500]

Thanks Julian I will give them a call in the morning.
The Heat shields I require are for the inner wings can anyone help me out..?
Gsw500.

[topsparks]

Gary,have a look in the Demon Tweeks catalogue,they do several types and sell the stuff that tvr power use. I think they might be online.


>> Edited by topsparks on Tuesday 1st March 21:37

[Griffer]

I've just done my heat shields, got the material from Agriemach Ltd on reccomendation from someone on here, top stuff,find them at www.agriemach.com

Have fun removing the manifolds to fit it though...

Steve

[gsw500]

Cheers James, will have a look.
Have you looked at your Le Mans thread...?

And thanks for that Steve will check them out.
BTW Steve the engine is out at the mo so should be alot easier.
Gsw500.

>> Edited by gsw500 on Wednesday 2nd March 11:16

[stesrg]

gsw500 said:

Need some help folks and being lazy thought I'd post it up before trawling thro the threads. I need to source some Por15 and have it delivered before Fri morning (March 4th) gotta get dirty on the chassis.. Also I need to replace the Heat Shields need good honest suppliers for both items and of course at a reasonable cost... Have short arms and long pockets at the mo.....! Items required for my 96 500 Serp. Many thanks in advance for your rapid responses.. GSW500.

Hi I have some templates somewere which i did in masking tape, i will have a look on monday, as i made mine in thin polished stainless steel.
Steve.

[gsw500]

Hi Steve.
Many thanks for offering I have managed to source some Top quality material that can be stitched over the top of the existing shields(new material is pretty thin) Drilling out pop rivets on existing shields and then re-covering and riveting back on.
Thanks.
Gsw500