Electric Window Motors

[Alan Whitaker]

Hi All
Is the window glass motor mount plate same on hand crank and electric units, I mean the metal plate on the glass that connects to the motor.

Many Thanks

Alan

[Alan Whitaker]

Is this the right plate for the electric Motors or are there other types



These are the door motors



Alan

[phillpot]

Different to mine Alan but three bolts in the motor linkage thing and three holes in the window bracket looks promising (mine has two)?

Should only be a matter of throw it together and drill a few holes or make an adapter plate if things don't line up? Kids stuff compared to what you've done so far!

[Alan Whitaker]

Hi All,
Mine has only 2 holes, that's both windows,.
Have had to glass in mounts in for the motors so today was going to be bolting in the motors.
Just wanting to know if I have got it right, I know there are 2 or 3 types of motor. so anybody any pictures of how my motors are bolted in, this is where I am now.

Alan

[phillpot]

Alan Whitaker said:

Mine has only 2 holes, that's both windows.

Oops, was counting 1...2...3....




My windows are perhaps the same but cut off along red line? but motors look different, think there were 2 or three types used?

[Alan Whitaker]

Thanks Mike.
After hours of fine tuning I have both windows going up and down, both doors locking, door gaps quite good but same as you had with the door stuck out at the bottom. Option 1 are going to do that when they spray it, can’t wait for September.

Alan

[phillpot]

Sounds like you're really getting there!


Changing the subject completely, did you have a supplier for stainless fittings for stainless braided brake hoses? Demon Tweeks have them but mega bucks!

I bought BZP (they were expensive enough) but plating is cr#p, they're rusting already

[Alan Whitaker]

Hi Mike.
I used these, all stainless

http://stores.ebay.co.uk/Torques-U-K/_i.html?_nkw=...

Alan