about freelander charging system
about freelander charging system
Author
Discussion

excellence

Original Poster:

4 posts

123 months

Friday 1st July 2016
quotequote all
what can cause battery light showing on the dashboard permanently and discharging the battery......for freelander 2 3.2...

paintman

7,860 posts

220 months

Friday 1st July 2016
quotequote all
Usually indicates a failed diode in the alternator. I don't know whether yours is ECU controlled though.

Edited by paintman on Friday 1st July 19:05

excellence

Original Poster:

4 posts

123 months

Saturday 2nd July 2016
quotequote all
we have replaced a new alternator and still behave the same and its ECU controlled....

excellence

Original Poster:

4 posts

123 months

Saturday 2nd July 2016
quotequote all
halo! my freelander 2 chasis no. SALFA23A27H006636 ,when i start the engine it runs for a while then the battery light comes on and shows permanently on the dashboard .I have replaced a new allternator but still it behave the same way .I am away from the dealer ,what do you think could be the problem and possible solution...

chammyman

125 posts

142 months

Saturday 2nd July 2016
quotequote all
Has it had a new battery and all the software updates?

FiF

48,837 posts

281 months

Saturday 2nd July 2016
quotequote all
First of all I would check earthing strap from battery to chassis. Plus if there are any other earths, eg to block or starter motor.

One thing I have found with mine, especially if the battery is s bit low, lots of short runs/ lots of electrical use, is to let the system go through all the checks before pressing the starter. Soine is an auto, push in key, wait a few seconds, push the start button without pressing brake, let it go through checks, then press brake and start button again.

To be fair I can get in, shove the key in, hit brake and start button all as fast as possible, it will start and not have problems, but every so often it has a brain fade and something stupid flags up due to a variation in voltage.

Agree with above about making sure all updates are done.

Also ask in freel2.com

http://www.freel2.com/forum/topic25874.html