E63 650 convertible - what to look out for ?
E63 650 convertible - what to look out for ?
Author
Discussion

anonymous-user

Original Poster:

85 months

Thursday 14th July 2016
quotequote all
[redacted]

spreadsheet monkey

4,825 posts

258 months

Thursday 14th July 2016
quotequote all
Detailed readers cars thread on a 645 here.

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

I agree the looks have aged well. From the sounds of it, the V8 engine is no more problematic than the six cylinder engines, and the flakey E6x electrics are the biggest source of hassle.

Herbs

5,132 posts

260 months

Thursday 14th July 2016
quotequote all
I've a 645 rather than a 650 which i'm about to offload as bought an Aston Martin.

Spec wise they vary massively.

For me, the must haves were:

Head-up Display
Alu trim
Dynamic Drive
Dynamic suspension
Active cruise control (radar)
Logic 7 stereo
Bluetooth

There are plenty of additional option's like TV etc which I rarely use.

You an also get a BMW approved extended warranty on the car if you purchase sub 60k miles or buy one which has it on (quite rare now but again, been really useful).

Tyres, brakes, suspension parts can be expensive as they are very well specced - just spent £2.5k doing disks, pads, track rod ends and balljoints.



Herbs

5,132 posts

260 months

Thursday 14th July 2016
quotequote all
anonymous said:
[redacted]
Replied

Any yes, massively so (had a R230 SL500 previously and would never go back to one even if you paid me).

Cheburator mk2

3,236 posts

230 months

Thursday 14th July 2016
quotequote all
anonymous said:
[redacted]
Your problem is that often it is the valve guides and not just the seals that need doing. BMW used finest mature Gauda for the guides. If that's the case, you are looking at quite a lot more than £2k as the prudent thing to do while in there is to replace the plastic banana chain guides etc...

parabolica

7,030 posts

215 months

Friday 15th July 2016
quotequote all
Cheburator mk2 said:
anonymous said:
[redacted]
Your problem is that often it is the valve guides and not just the seals that need doing. BMW used finest mature Gauda for the guides. If that's the case, you are looking at quite a lot more than £2k as the prudent thing to do while in there is to replace the plastic banana chain guides etc...
Indeed; I was quoted £5k+ to essentially strip and replace all worn engine components by my local garage; quote from a respected indy who specializes in the work was £3k + anything else that needed doing as a matter of course.