Discussion
On the Chim user guide (4.0) it says "The engine oil pressure should not fall below 10 pounds per square inch. Should the gauge fail to register or there is an appreciable difference in normal working pressure, switch off the engine immediately...."
But my question is what about hot/cold readings and mine is a bit vague anyhow, bit like the fuel gauge
But my question is what about hot/cold readings and mine is a bit vague anyhow, bit like the fuel gauge

like 2 smokin barrels,my guess is probably no problem also.a couple of points though.1)you should find that in total you can get 6 litres in not 5 on a new oil and filter change(2 litres i think between dipstick marks) 2)as long as your oil pressure was good then in theory you had enough in there,it just wouldnt last so long. 3)get that 0w whatever it is out from there-use 15-50,10-60,20-50 or whatever depending on engine mileage,time of year,personal preference etc.most use 15-50 mobil1 motorsport all year round though. 4)if youve done any real damage youll hear it probably.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff




