More alarm probs...
Discussion
Anyone able to pm me with where the alarm module is located? Its seems to have gone on the fritz
Apparently it was going off randomly the last two days, and now it doesn't chirp on arm/disarm despite me turning the feature on/off. I'm not sure the siren even works at all now. When I checked the code for what had been triggering, it displayed the siren tamper code which doesn't seem promising.
Its a bit gutting as its only just back from service having cost a fair whack.
DanH said:
Anyone able to pm me with where the alarm module is located? Its seems to have gone on the fritz![]()
Sorry Dan, don't know but suggest location responses come to you privately for security.
It sounds like the power may have been cut during your recent work so maybe it just needs resetting or something?!
Let me know if you need the AutoWatch helpline number (won't be until Monday now though)?
V6GTO said:
Greg,
I know you are trying to help Dan, but the more infomation you put on here the more everyones security is compromised. It might be better to do it by e-mail.![]()
Martin.
Sorry, having a dim moment.
edited to say I have now deleted my silly post! opps.
>> Edited by Mr Noble on Saturday 12th March 10:19
Will give the reset a shot. Autowatch number is on the web, but presumably they don't work saturdays. Might give it a shot anyway.
Thanks all, this is really getting on my tits, and its probably going to drain the battery. At least the locking is still working at the moment (tempting fate...)
Dan - you can disconnect the siren which at least will stop it being so annoying - I had this happen to me once and Lee sent me an email saying how to shut it up - if you need the details email me.
Mine was caused my water in the siren - not Nobles fault as it is a sealed unit.
Cheers
Mine was caused my water in the siren - not Nobles fault as it is a sealed unit.
Cheers
Hmm the engine bay/front were hosed down at the service...
Nathan any chance of emailing me the details as if it doesn't stop soon the neighbours will be lynching me! Not like I can even lock the doors without the sodding thing activating itself!
Its either that, or the wiring has been disturbed fitting in the active aerial. Its all a bit of a mess in there, with far too many over long wires and connectors all crammed in.
m12_nathan said:
Dan - you can disconnect the siren which at least will stop it being so annoying - I had this happen to me once and Lee sent me an email saying how to shut it up - if you need the details email me.
Mine was caused my water in the siren - not Nobles fault as it is a sealed unit.
Cheers
Did you have to replace the siren btw?
Gassing Station | Noble | Top of Page | What's New | My Stuff



? They break down too!