E90 Brakes questions
Discussion
My old Evo had the same Brembo calipers as the models 5 or 6 onwards so disk/pad ordering was easy, but the brakes on my 330D LCI M-sport are hurting my head!
I have a couple of issues, the first of which is that one of the bleed nipples had broken on one of the rear calipers (NSR). I'd like to track down an OEM one on Ebay but am confused as to which models shared the same calipers.
Second query relates to the first in that iDrive is convinced I have worn my rear pads - based upon mileage - when the reality is that there is loads of life left in them; as confirmed by Main Dealer last week. I know you can mess about disconnecting and reconnecting the sensors but, as the arch liners need to be removed to do this, I may well just change pads/sensors at the same time, myself. I obviously need to understand fitment options to do this.
Any E90 brake experts around?
I have a couple of issues, the first of which is that one of the bleed nipples had broken on one of the rear calipers (NSR). I'd like to track down an OEM one on Ebay but am confused as to which models shared the same calipers.
Second query relates to the first in that iDrive is convinced I have worn my rear pads - based upon mileage - when the reality is that there is loads of life left in them; as confirmed by Main Dealer last week. I know you can mess about disconnecting and reconnecting the sensors but, as the arch liners need to be removed to do this, I may well just change pads/sensors at the same time, myself. I obviously need to understand fitment options to do this.
Any E90 brake experts around?
Regarding the sensors, you are wasting your time trying to reset them.
Buy a pair, they are cheap as chips on EBay or similar and replace them in 30 moping or so. The fronts terminate in a little box behind the suspension strut, and the rears you can get away with removing a few of the plastic nuts/screws to give enough access.
It's really easy to do.
Buy a pair, they are cheap as chips on EBay or similar and replace them in 30 moping or so. The fronts terminate in a little box behind the suspension strut, and the rears you can get away with removing a few of the plastic nuts/screws to give enough access.
It's really easy to do.
Thanks for the above info Dannbodge. Very helpful. (I had been confused as people talked about putting 335 brake setup on their 320).
pattyg said:
Re your second query - if CBS is telling you new pads and dealer has confirmed they are not required then can you not just reset the CBS?
I did this and it changed to 20,000 miles. On the next start up it changed (and is currently counting down from) 500 miles.f1nn said:
Regarding the sensors, you are wasting your time trying to reset them.
Buy a pair, they are cheap as chips on EBay or similar and replace them in 30 moping or so. The fronts terminate in a little box behind the suspension strut, and the rears you can get away with removing a few of the plastic nuts/screws to give enough access.
It's really easy to do.
I had resigned myself to this - or pads at the same time.Buy a pair, they are cheap as chips on EBay or similar and replace them in 30 moping or so. The fronts terminate in a little box behind the suspension strut, and the rears you can get away with removing a few of the plastic nuts/screws to give enough access.
It's really easy to do.
If you ever get stuck again,
Just have a look here: http://www.realoem.com/bmw/enUS/select
Gives you part numbers and the models that use them.
Just have a look here: http://www.realoem.com/bmw/enUS/select
Gives you part numbers and the models that use them.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


