Lightweight airline

[Jamesgt]

Does anyone know where I can get VERY light flexible airline? Needs to support 110psi and internal diameter of 1/4"

[paintman]

Lightest is likely to be one of the curly wurly type.
Don't know what you intend to use it for but 1/4" bore (6mm) is OK for tyre inflation or a blowgun but no use for air tools such as rattle guns as it can't pass the volume of air they need.

[anonymous-user]

I've got 9m of green left over from a job you can have FOC if it's any use. internal diameter of 3/8inch. weighs 1.1kg. 20 bar rated.

can bag it up if you want to collect it?

[Jamesgt]

MDMA . said:

I've got 9m of green left over from a job you can have FOC if it's any use. internal diameter of 3/8inch. weighs 1.1kg. 20 bar rated.

can bag it up if you want to collect it?

Thanks for the offer. Very kind of you. Where in the country are you?

Curly wurly type is a good suggestion but I need it to run along the floor flat and not yank the tools out of my hand.

[anonymous-user]

PM me your postcode and house number and i'll stick it in the post tonight. there are no ends on either side. it is a 9m off cut from a 50m roll so you will have to get some connectors yourself. if i have any ends lying around, i'll put them in with it.

HTH.

[Jamesgt]

MDMA . said:

PM me your postcode and house number and i'll stick it in the post tonight. there are no ends on either side. it is a 9m off cut from a 50m roll so you will have to get some connectors yourself. if i have any ends lying around, i'll put them in with it.

HTH.

Thanks for that MDMA. Very generous of you. I'll send you a mail now. I'm ok for connectors as I will take them off my old line. I melted a section of my old one incidentally so I chopped it to salvage what I could but it's pretty short now.

[anonymous-user]

gone

[Jamesgt]

Cheers for that! Very grateful.