BMW alloys cracked?
Discussion
Had slow puncture on front 2 tyres on my 645. So put 2 part worn's on and still got puncture. Im not sure if the tyres are the issue or alloys could be cracked? Is this feasible for the allow to be letting air out? I really need to get them in a large bath/bucket and check for air leaks.
wjwren said:
Had slow puncture on front 2 tyres on my 645. So put 2 part worn's on and still got puncture. Im not sure if the tyres are the issue or alloys could be cracked? Is this feasible for the allow to be letting air out? I really need to get them in a large bath/bucket and check for air leaks.
I had that on my old E46, not sure if it was a crack but it was the deterioration of the alloys essentially forcing the air out. They cleaned them up, rubbed some kind of paste over them and I was good to go. I think they said there's only a few times they could do that before a repair, but my advice would be to take it to a good independent (i.e. not quick sh*t) tyre place. I paid about 16£. I had both of your possible scenarios on my 645ci.
A slow leak was fixed by having the alloys applied with a sealant at a tyre shop (about £18) and that immediately fixed the slow puncture.
I then experienced your second potential (a cracked alloy) come MOT time. Despite concerns I had the wheel welded for £50 and had no troubles.
Could be either, take it to a place that offers sealing and ask them to inspect for cracks also.
A slow leak was fixed by having the alloys applied with a sealant at a tyre shop (about £18) and that immediately fixed the slow puncture.
I then experienced your second potential (a cracked alloy) come MOT time. Despite concerns I had the wheel welded for £50 and had no troubles.
Could be either, take it to a place that offers sealing and ask them to inspect for cracks also.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


