Injectors
Author
Discussion

S4CJO

Original Poster:

429 posts

282 months

Sunday 13th November 2016
quotequote all
This has probably been done to death elsewhere in the forum. However need to either have the std injectors on my 450 cleaned or replaced with new. Going down the new route any thoughts on a supplier?

Ptr400J

239 posts

114 months

Sunday 13th November 2016
quotequote all
Just done the same with my 450, TVR Parts Ltd.

Part no TVRE0351, standard Lucas injector. and they were the best price for new anywhere I could find. smile

Delivered in 24 hrs !

ClassiChimi

12,424 posts

172 months

Sunday 13th November 2016
quotequote all
I think I'm right in saying the original injectors are good for 300bhp minimum, correct me if I'm wrong.

Some Reconditioning companies are renowned for doing a good job on injectors, might be worth comparing the price of new against getting yours reconditioned, they tend to know wether or not your injectors are past being reworked so they'll inform you before doing them! Cost of the post at worst.
New injectors do sound sexy though laugh

jojackson4

3,042 posts

160 months

Sunday 13th November 2016
quotequote all
Got some vectra ones ready to go and get cleaned and serviced

skiver.

658 posts

216 months

Sunday 13th November 2016
quotequote all
For cleaning try http://www.precisiontune.com/Franchisees/Salisbury... They offer a postal service and I think I paid about £10/injector 18 months ago.

S4CJO

Original Poster:

429 posts

282 months

Sunday 13th November 2016
quotequote all
Many thanks all, think I'll check out getting them cleaned and tested may only then need to replace any suspect ones.

skiver.

658 posts

216 months

Sunday 13th November 2016
quotequote all
Oops, that website should be www.injectortune.co.uk

Steve_D

13,801 posts

281 months

Sunday 13th November 2016
quotequote all
skiver. said:
Oops, that website should be www.injectortune.co.uk
I've used them.
Came back cleaned, tested, new seals, new filter baskets and a report on how well matched they were.

Quick service.

Steve

ClassiChimi

12,424 posts

172 months

Sunday 13th November 2016
quotequote all
jojackson4 said:
Got some vectra ones ready to go and get cleaned and serviced
Do these support higher Bhp than the O/E ones Pete.
Better spray too I once heard?

jojackson4

3,042 posts

160 months

Monday 14th November 2016
quotequote all
ClassiChimi said:
Do these support higher Bhp than the O/E ones Pete.
Better spray too I once heard?
It's mostly the pattern and some more flow

ClassiChimi

12,424 posts

172 months

Monday 14th November 2016
quotequote all
jojackson4 said:
It's mostly the pattern and some more flow
thumbup

QBee

22,118 posts

167 months

Tuesday 15th November 2016
quotequote all
ClassiChimi said:
I think I'm right in saying the original injectors are good for 300bhp minimum, correct me if I'm wrong.

Did you mean "maximum", not "minimum"?

phazed

22,455 posts

227 months

Tuesday 15th November 2016
quotequote all
I ran 340+ with original Lucas injectors but changed shortly after for the Vectra items.

N7GTX

8,263 posts

166 months

Tuesday 15th November 2016
quotequote all
Mine are standard items. Over 400bhp you really need bigger ones said Dom (trying to prise open my wallet yet again...)