Warning light flashing - when turning right mostly
Discussion
An 08 118d 110k miles has started giving me trouble.
At first it seemed it didn't like high speed motorway action for too long and it tripped into limp mode. After a short stop this cleared and the car would drive fine if I kept the speed down a little.
Then it happened more often and ive noticed the warning light flashes and power is cut when turning right. Never happens turning left.
I had the fault codes read and cleared but it was doing it again this morning on the way to work.
4D03 Exhaust back pressure sensor
480A Particulate trap system
447B Oxygen sensor
4BDA Fuel pump pressure control
Most advice upto now is to at least have the DPF cleaned out.
But whats with the weird turning right thing?
At first it seemed it didn't like high speed motorway action for too long and it tripped into limp mode. After a short stop this cleared and the car would drive fine if I kept the speed down a little.
Then it happened more often and ive noticed the warning light flashes and power is cut when turning right. Never happens turning left.
I had the fault codes read and cleared but it was doing it again this morning on the way to work.
4D03 Exhaust back pressure sensor
480A Particulate trap system
447B Oxygen sensor
4BDA Fuel pump pressure control
Most advice upto now is to at least have the DPF cleaned out.
But whats with the weird turning right thing?
If it's a flashing yellow light, that's going to be traction control, not related to them fault codes, that's a different issue.
It's going to be one of a couple of things - either corroded sensor pickup which is damaging the abs wheel speed sensor giving dodgy readings and making the the car think it's slipping, hence bringing in the traction control to brake and reduce throttle,
Or you could have a flat tyre or wrong size tyre or mismatched wheels on an axle.
If u press and hold the traction button on the dash for ten seconds it will switch off the system and put the light on the dash, but you will find it then drives fine with no problems
It's going to be one of a couple of things - either corroded sensor pickup which is damaging the abs wheel speed sensor giving dodgy readings and making the the car think it's slipping, hence bringing in the traction control to brake and reduce throttle,
Or you could have a flat tyre or wrong size tyre or mismatched wheels on an axle.
If u press and hold the traction button on the dash for ten seconds it will switch off the system and put the light on the dash, but you will find it then drives fine with no problems
Elliot2000 said:
If it's a flashing yellow light, that's going to be traction control, not related to them fault codes, that's a different issue.
It's going to be one of a couple of things - either corroded sensor pickup which is damaging the abs wheel speed sensor giving dodgy readings and making the the car think it's slipping, hence bringing in the traction control to brake and reduce throttle,
Or you could have a flat tyre or wrong size tyre or mismatched wheels on an axle.
If u press and hold the traction button on the dash for ten seconds it will switch off the system and put the light on the dash, but you will find it then drives fine with no problems
Just happens I tried this tonight and it seems to be driving fine.It's going to be one of a couple of things - either corroded sensor pickup which is damaging the abs wheel speed sensor giving dodgy readings and making the the car think it's slipping, hence bringing in the traction control to brake and reduce throttle,
Or you could have a flat tyre or wrong size tyre or mismatched wheels on an axle.
If u press and hold the traction button on the dash for ten seconds it will switch off the system and put the light on the dash, but you will find it then drives fine with no problems
I guess the DPF needs doing also.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


