DPF passive regen
DPF passive regen
Author
Discussion

Discopotatoes

Original Poster:

4,101 posts

252 months

Tuesday 22nd November 2016
quotequote all
I've had my 335d since March this year and I've had the DPF fault light come on 3 times up till now.
I do nearly all motorway driving with the odd little bit round town, I know my thermostat is ok so why doesn't the passive regen work like it should?
I do have a carley for BMW so I can fix the problem but it's a real PITA as once it goes it must take about 50 to 80 attempts at code clearing and an hour and a half driving down the motorway just to force a regen.

helix402

7,913 posts

213 months

Tuesday 22nd November 2016
quotequote all
Are the glow plugs and controller ok?

Discopotatoes

Original Poster:

4,101 posts

252 months

Tuesday 22nd November 2016
quotequote all
helix402 said:
Are the glow plugs and controller ok?
Now you mention it. this time round it says cylinder 2 glow plug has a fault, which won't clear

Sheepshanks

41,367 posts

150 months

Tuesday 22nd November 2016
quotequote all
Discopotatoes said:
... so why doesn't the passive regen work like it should?
Is it supposed to passive regen?

I think it's pretty common now that cars active regen every few hundred miles. Wife's year old Tiguan does - it has the latest VW engine, but I know cars with the older engine are the same.

I asked the dealer and VW and they both insisted it will passive regen. But it won't - it never gets anywhere near hot enough. VW's engineer know this, hence they set it to passive regen at a certain soot loading or at max 465 miles.

Based on discussion on a more general forum recently, this set-up is common now - but I don't know about BMW.

Vee

3,109 posts

265 months

Tuesday 22nd November 2016
quotequote all
Once it starts again after clearing it, does it light up exactly 10 mins after starting the car ?
What is the mileage on the car ?
The DPF could actually be blocked, or the pressure sensor could be faulty triggering the light.
One glow plug failed would not stop a regen.

xjay1337

15,966 posts

149 months

Tuesday 22nd November 2016
quotequote all
Sheepshanks said:
Is it supposed to passive regen?

I think it's pretty common now that cars active regen every few hundred miles. Wife's year old Tiguan does - it has the latest VW engine, but I know cars with the older engine are the same.

I asked the dealer and VW and they both insisted it will passive regen. But it won't - it never gets anywhere near hot enough. VW's engineer know this, hence they set it to passive regen at a certain soot loading or at max 465 miles.

Based on discussion on a more general forum recently, this set-up is common now - but I don't know about BMW.
Yup this is true.

Mine never regened itself or got even nearly hot enough without active intevention.

Discopotatoes

Original Poster:

4,101 posts

252 months

Tuesday 22nd November 2016
quotequote all
Vee said:
Once it starts again after clearing it, does it light up exactly 10 mins after starting the car ?
What is the mileage on the car ?
The DPF could actually be blocked, or the pressure sensor could be faulty triggering the light.
One glow plug failed would not stop a regen.
Once the light comes up on the dash I have two fault codes I can clear the dash light fault it's the first hidden fault which takes forever to try and clear, which prevents a forced regen, looks like I'm going to be changing the glow plugs and relay sometime soon.

helix402

7,913 posts

213 months

Tuesday 22nd November 2016
quotequote all

Vee

3,109 posts

265 months

Wednesday 23rd November 2016
quotequote all
Discopotatoes said:
Once the light comes up on the dash I have two fault codes I can clear the dash light fault it's the first hidden fault which takes forever to try and clear, which prevents a forced regen, looks like I'm going to be changing the glow plugs and relay sometime soon.
The 480A and 481A you mean the code ?
Sounds like you could have something else wrong because I used to be able to clear mine and for the regen to start within 20 miles (my journey to work).
If you have the diagnostic tool, what is the exhaust back pressure reading ?
A faulty pressure sensor meant my car always thought it was too blocked to regen.