Dancing mirrors!
Discussion
My door mirrors have stopped responding to the control buttons, and yesterday I noticed that every time I turn the ignition on, both mirrors do a little dance where they move in sequence to each of the four corners of their travel before moving back to a roughly central position. It's as if they're doing a calibration routine. After they've stopped moving, they still don't respond to the buttons.
I've never noticed this 'dance' before. Is it normal behaviour? Does it actually happen every time you turn the ignition on, and I've just never noticed it?!
Any ideas what might be wrong? I'm assuming it's not just a fuse, because clearly the motors are working.
I've never noticed this 'dance' before. Is it normal behaviour? Does it actually happen every time you turn the ignition on, and I've just never noticed it?!
Any ideas what might be wrong? I'm assuming it's not just a fuse, because clearly the motors are working.
mach2 said:
As yours is a '99 model my first suspicion would be the mirror control module that sits somewhere underneath the dash around the steering column. Given the symptoms on start-up and then the non-functioning I'd be checking there first.
This is a good shout, you can send your unit to TVR Heritage Parts for checking and repairing if necessary Dr Mike Oxgreen said:
Penelope Stopit said:
Are the door looms in good order?
I've no idea. But if you're suggesting that a short could be causing the motors to move, I think that's unlikely. The motors are moving together, in parallel, and in a definite clockwise square and then back to central.Is the mirror control unit in the drivers door?
Off topic... Doctor, would you happen to own any videos taken from aircraft?
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


