RHD DB7 series2 RH blower removal
RHD DB7 series2 RH blower removal
Author
Discussion

laikathedog

Original Poster:

61 posts

164 months

Saturday 7th January 2017
quotequote all
hello

i have a RHD DB7 with a death rattle fan on the drivers side

i read the manual and the few posts on the topic for removal

i have removed the two 10mm nuts at the bottom, loosened the two 10mm top nuts and removed two 11mm bolts

the fan is loose, but it only drops about half an inch before it feels like it is trapped at the top

i cannot see how to get the thing out...any advice from people who have had success ?

IanV12VR

2,749 posts

186 months

Saturday 7th January 2017
quotequote all
I would also try the Bloxham section of the AMOC forum as there is some very good knowledge of these cars and you could well get your answer there.

laikathedog

Original Poster:

61 posts

164 months

Sunday 8th January 2017
quotequote all
after you rémove all the bolts...set right dial to recirculation should open the lower flap shutting the upper flap
releasing the blower unit. as per tech manual step 13 wedge open the lower flap...