feel sick help needed, ceramic brakes.
Discussion
seeking some help I have a 2013 db9 volante immaculate 26k miles run out of warranty 3/ 4mths ago noticed a bit of vibration when I was driving thought it just needed the wheels balancing so I thought I would take it down to jct .Just received the phone call ; Hi sorry its not your wheels that need balancing its your brake discs that are a little bit warped ,so for us to fix it you need new discs and brakes which will come to £8k . unbelievable . where do I go from here is there anybody out there who can give me some advice or do I just live with the vibration .
can you get them skimmed ?
has anybody replaced them in the past if so how much ?
if ceramic brakes are so good why has this happened?
do you think I would get any help from aston ?
this is my 4 aston never had anything go wrong with the others .
your help would be gratefully received
neil
can you get them skimmed ?
has anybody replaced them in the past if so how much ?
if ceramic brakes are so good why has this happened?
do you think I would get any help from aston ?
this is my 4 aston never had anything go wrong with the others .
your help would be gratefully received
neil
Kersh2312 said:
seeking some help I have a 2013 db9 volante immaculate 26k miles run out of warranty 3/ 4mths ago noticed a bit of vibration when I was driving thought it just needed the wheels balancing so I thought I would take it down to jct .Just received the phone call ; Hi sorry its not your wheels that need balancing its your brake discs that are a little bit warped ,so for us to fix it you need new discs and brakes which will come to £8k . unbelievable . where do I go from here is there anybody out there who can give me some advice or do I just live with the vibration .
can you get them skimmed ?
has anybody replaced them in the past if so how much ?
if ceramic brakes are so good why has this happened?
do you think I would get any help from aston ?
this is my 4 aston never had anything go wrong with the others .
your help would be gratefully received
neil
Take it to Bamford Rose or another decent independent garage and get a second opinion. Note that there were cases of vibration at speed with early DBS CCM implementations and there were dealer advisories issued about balancing the brake disc and the wheel. Talk to an expert...can you get them skimmed ?
has anybody replaced them in the past if so how much ?
if ceramic brakes are so good why has this happened?
do you think I would get any help from aston ?
this is my 4 aston never had anything go wrong with the others .
your help would be gratefully received
neil
Well, don't feel too bad. The waranty would be unlikely to have covered them unless it was a manufacturing defect. Even then, you might have had a bit of a tussle to get a result.
Although I have no experience with them, I have kept a close eye on SICOM. They refurb CCM rotors. Heard good things from them.
I have heard bad things from the service of an intermediate, so I would ensure you go to a UK rep or direct.
http://www.rebrake.de/portfolio/aston-martin/?lang...
Or you could try Astonbits.
https://astonmartinbits.com/models/14-NEW-DB9-2-13... - each
https://astonmartinbits.com/models/14-NEW-DB9-2-13... - set
Then fit yourself. Bedding in has to be done precisely but its not hard according to the Aston Tech documents.
If the SICOM service is as good as they say, you might end up with better rotors than OEM.
(edit) - added a link to some info- http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Although I have no experience with them, I have kept a close eye on SICOM. They refurb CCM rotors. Heard good things from them.
I have heard bad things from the service of an intermediate, so I would ensure you go to a UK rep or direct.
http://www.rebrake.de/portfolio/aston-martin/?lang...
Or you could try Astonbits.
https://astonmartinbits.com/models/14-NEW-DB9-2-13... - each
https://astonmartinbits.com/models/14-NEW-DB9-2-13... - set
Then fit yourself. Bedding in has to be done precisely but its not hard according to the Aston Tech documents.
If the SICOM service is as good as they say, you might end up with better rotors than OEM.
(edit) - added a link to some info- http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Edited by divetheworld on Tuesday 10th January 16:39
Usually, this works if undertaken by someone competent

If the discs are in need of renewal only because vibration cannot be cured and for no other reason, yeah, have to live with it but search around because that price seems high.
I have seen before suspension joints, flat spot tyres, faulty dampers cause the vibration - a second opinion somewhere competent is sound advice.
If the discs are in need of renewal only because vibration cannot be cured and for no other reason, yeah, have to live with it but search around because that price seems high.
I have seen before suspension joints, flat spot tyres, faulty dampers cause the vibration - a second opinion somewhere competent is sound advice.
Way back I had a new DBS affected by wheel wobble from new. As described above it became worse with speed. I think the fault was eventually traced to sensitivity between the fine balancing of the wheel and ceramic brake disc.
Do give customer services a call and see how they react, given the variables that arise over a longer period of ownership you may not get far, but worth trying.
Do give customer services a call and see how they react, given the variables that arise over a longer period of ownership you may not get far, but worth trying.
Very often the advice regarding vibrations is simply wrong, so be very careful before you pay money based on bad advice.
I think it is extremely unlikely that you will need new ceramic discs.
I would advise following the advice in the Aston Martin document above, or something close to it.
Does the vibration happen when braking or is it constant?
My advice...go for a long drive and then drive the car straight onto a hoist. No delay, straight onto a hoist. Get the wheel and tyre assemblies measured for road force variation, also called radial force variation. Get the technician to give you the 4 detailed print outs of the road force variation in the first and second harmonics and post it on here.
The other possibility is brake pad material deposition on your disc. Warping is unlikely.
How hard do you drive? i.e. Are you a lunatic?
I think it is extremely unlikely that you will need new ceramic discs.
I would advise following the advice in the Aston Martin document above, or something close to it.
Does the vibration happen when braking or is it constant?
My advice...go for a long drive and then drive the car straight onto a hoist. No delay, straight onto a hoist. Get the wheel and tyre assemblies measured for road force variation, also called radial force variation. Get the technician to give you the 4 detailed print outs of the road force variation in the first and second harmonics and post it on here.
The other possibility is brake pad material deposition on your disc. Warping is unlikely.
How hard do you drive? i.e. Are you a lunatic?
stuno1 said:
Maybe a stupid suggestion but if they need replacing could you not replace them with steel brakes to save a load of money? I mean, do you really need carbon ceramics...:
This can be done. So you need four new discs, new calipers, new pads, fluids, fitting...Then you need to reprogram the traction control and other stuff. Not sure what that would cost?
But is this about "need" or want? Who needs a six litre V12? Who wants one?
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff





