Numb hands when riding?
Discussion
Anybody here get numb or tingling/aching hands after a few miles?
It is a problem I've had for the last 20 years or more. It started when I moved overseas and was riding a SR500 Yam vibratory machine. The next bike I had was a Harley Sporter, which also vibrated like crazy, pre-rubber motor mount version. I swapped grips, swapper handlebars etc, made no difference. That bike vibrated my eye balls at certain rpm.
I stopped riding for five years.
Anyway, I just moved back to England and bought myself a Bandit 1200 and slowly getting some gear together to start riding when the weather gets better. Hoping a smoother, less rattly bike might be easier on my hands.
I had a carpal tunnel op on the left hand about ten years ago, which seems to help, but it was always the throttle hand, that was tense all the time, that suffered most. Might need to get the cut on that one too.......
It is a problem I've had for the last 20 years or more. It started when I moved overseas and was riding a SR500 Yam vibratory machine. The next bike I had was a Harley Sporter, which also vibrated like crazy, pre-rubber motor mount version. I swapped grips, swapper handlebars etc, made no difference. That bike vibrated my eye balls at certain rpm.
I stopped riding for five years.
Anyway, I just moved back to England and bought myself a Bandit 1200 and slowly getting some gear together to start riding when the weather gets better. Hoping a smoother, less rattly bike might be easier on my hands.
I had a carpal tunnel op on the left hand about ten years ago, which seems to help, but it was always the throttle hand, that was tense all the time, that suffered most. Might need to get the cut on that one too.......
King Herald said:
Anybody here get numb or tingling/aching hands after a few miles?
It is a problem I've had for the last 20 years or more. It started when I moved overseas and was riding a SR500 Yam vibratory machine. The next bike I had was a Harley Sporter, which also vibrated like crazy, pre-rubber motor mount version. I swapped grips, swapper handlebars etc, made no difference. That bike vibrated my eye balls at certain rpm.
I stopped riding for five years.
Anyway, I just moved back to England and bought myself a Bandit 1200 and slowly getting some gear together to start riding when the weather gets better. Hoping a smoother, less rattly bike might be easier on my hands.
I had a carpal tunnel op on the left hand about ten years ago, which seems to help, but it was always the throttle hand, that was tense all the time, that suffered most. Might need to get the cut on that one too.......
Some bike are more vibey than others. Twins/V4s are worse than IL4s.It is a problem I've had for the last 20 years or more. It started when I moved overseas and was riding a SR500 Yam vibratory machine. The next bike I had was a Harley Sporter, which also vibrated like crazy, pre-rubber motor mount version. I swapped grips, swapper handlebars etc, made no difference. That bike vibrated my eye balls at certain rpm.
I stopped riding for five years.
Anyway, I just moved back to England and bought myself a Bandit 1200 and slowly getting some gear together to start riding when the weather gets better. Hoping a smoother, less rattly bike might be easier on my hands.
I had a carpal tunnel op on the left hand about ten years ago, which seems to help, but it was always the throttle hand, that was tense all the time, that suffered most. Might need to get the cut on that one too.......
I had a bandit 1250 and found that a bit vibey still. I ride to work and it's 1.5 hrs away. After an hour i got tingly fingers. I'd imagine a 1200 is a bit rougher than a 1250.
Best vibe-free bike i've had was a blackbird. Super smooth. Fireblade was also very smooth.
And oddly the VFR800Fi that i'm running now is pretty good considering it's a V4.
I used to get them all the time, then I bought some gloves that fit me properly and the problem has mostly disappeared, you could also fit one of these to relieve the pressure when cruising http://www.crampbuster.com/ as they have been proven to help.
PTF said:
Some bike are more vibey than others. Twins/V4s are worse than IL4s.
Wouldn't necessarily say more vibey, they just vibrate in different ways. I get less problems on my KTM V twin than I did on a Honda IL4 600. Depends also where in the rev range they vibrate worse. Good fitting gloves is a good shout, as is filling handlebars with sand or bathroom sealant or heavier bar ends.Jazoli said:
I used to get them all the time, then I bought some gloves that fit me properly and the problem has mostly disappeared, you could also fit one of these to relieve the pressure when cruising http://www.crampbuster.com/ as they have been proven to help.
Must admit, I never wore gloves in the Philippines, but the ones I had in the uk were a bit squeezy. I've found a pair that are bigger and more like the gloves of old than the usual race-style summer mini-gloves you see in shops. That cruise control device, I saw them around years ago and even made one for a friend in the Philippines who rode a motorcycle taxi all day long. He reckons it worked great. Just rest your hand on it. No need for a firm grip when cruising along.
I may buy one if the Bandit is no better than the other bikes. I made some solid steel bars for my Yam 500, just for style, but it made no difference to the cramping.
After I had the carpal operation 8 or 10 years ago the physio showed me some stretching exercises for the hand, to make sure it didn't simply grow back together the same as before. I did them with both hands and never felt the need to get the right hand cut. I had it done privately and you can hardly even see the scar now. Maybe I'll need to get t'other one done if none of the above suggestions work.
Fingers crossed.cbmotorsport said:
You can also try some heavier bar end weights, this can tame vibration.
This will go a long way to helping with the problem. I recently bought a BMW S1000 XR which are renowned for the vibes. Whilst mine wasn't that bad initially some heavier bar end weights removed the vibes completely. I've also had a v twin Aprilia and bought some sexy bar ends to replace the originals that I always though were ungainly. The news ones were much lighter and slimmer, looked just the ticket. After one ride I soon realised why Aprilia had fitted the great big lumps of metal in the first place. And the new ones ended up in the bin.
I've also heard of people filling the bars with lead shot or sand to some effect although not tried this method personally as bar end weights take two mins to fit and cost little.
Get yourself a Throttle Mesiter (sp) its a bit of plastic that clips to the throttle that lets you rest your wrist on it when cruising. Have to be careful with them though as the wrong movement can see sudden acceleration when not required. Story for another day.
Edited by Harry H on Friday 10th February 12:37
Numb hands can be a few things.
1. Vibration
2. Holding on to hard.
3. The tension in your body when riding.
Common fixed for the first is bar end, better gloves, and better grips.
The second is practice and reminding your self to relax your grip.
The is about body position on the bike, relaxing and stretching.
There is more but this is the most common I know of.
1. Vibration
2. Holding on to hard.
3. The tension in your body when riding.
Common fixed for the first is bar end, better gloves, and better grips.
The second is practice and reminding your self to relax your grip.
The is about body position on the bike, relaxing and stretching.
There is more but this is the most common I know of.
I do after some long spirited riding. However, I used to work with a hammer drill 8 hours a day for about 2 years which I believe caused some nerve damage. I used to get the 'bouncy' feeling in my fingers after use which is the same thing I get from the bike when it's been up in the high revs consistently. I use it as an excuse to pull in for five minutes and have a cigarette.
RemyMartin81D said:
Tank gripper pads are the best thing at curing this.
Used properly you shouldn't have any weight through your arms at all. God send on Daytona 675.
Agree that sticky gripper pads on your tank help, as does improving fitness and strength in your legs/core - running or cycling are ideal. Means that you ride more with your legs and body than your arms and hands.Used properly you shouldn't have any weight through your arms at all. God send on Daytona 675.
1. Grip with knees to lessen weight on your wrists and hands.
2. Bigger bar end weights
3. Thicker hand grips - grip puppies?
4. Periodically wiggle fingers to promote circulation
5. Find the smoothest engine you can get hold of. Fireblade, CB1000, X11 and the like. My XJR1300 was pretty smooth. I have heard that the SV1000 engine is very very smooth, but have never tried it.
Best of luck.
2. Bigger bar end weights
3. Thicker hand grips - grip puppies?
4. Periodically wiggle fingers to promote circulation
5. Find the smoothest engine you can get hold of. Fireblade, CB1000, X11 and the like. My XJR1300 was pretty smooth. I have heard that the SV1000 engine is very very smooth, but have never tried it.
Best of luck.
I have the VFR800 and was suffering (probably holding on too hard) so got one of these - thoroughly recommended...
http://www.halfords.com/motoring/motorcycling/moto...
la-229711830244|crid:106226716564|nw:g|rnd:16659117795673061392|dvc:c|adp:1o4&gclid=CKyot-XlhdICFWIq0wodBH0OXQ

http://www.halfords.com/motoring/motorcycling/moto...
la-229711830244|crid:106226716564|nw:g|rnd:16659117795673061392|dvc:c|adp:1o4&gclid=CKyot-XlhdICFWIq0wodBH0OXQmgv8 said:
...
The second is practice and reminding your self to relax your grip.
The is about body position on the bike, relaxing and stretching.
There is more but this is the most common I know of.
Something I had lots of trouble with years ago when doing long miles was hunching my shoulders. I used to get aching pains in my neck and upper spine area, thought it was cold wind and tried wrapping up,with scarves and all sorts. The second is practice and reminding your self to relax your grip.
The is about body position on the bike, relaxing and stretching.
There is more but this is the most common I know of.
Eventually, after a few years, I realized I was ducking my neck down and hunching my showers up, like women do when they are cold. I practiced not doing it, relaxing and changing posture, and it worked, the pain went away.
Might work for the grip too.
jaja4421 said:
I have the VFR800 and was suffering (probably holding on too hard) so got one of these - thoroughly recommended...
http://www.halfords.com/motoring/motorcycling/moto...
la-229711830244|crid:106226716564|nw:g|rnd:16659117795673061392|dvc:c|adp:1o4&gclid=CKyot-XlhdICFWIq0wodBH0OXQ

I'll check that sort of thing out if the dreaded dead hand returns on the Bandit. http://www.halfords.com/motoring/motorcycling/moto...
la-229711830244|crid:106226716564|nw:g|rnd:16659117795673061392|dvc:c|adp:1o4&gclid=CKyot-XlhdICFWIq0wodBH0OXQgareth_r said:
At least the Bandit has proper handlebars, and it's easy to adjust the riding position if you need to take weight off your arms, or you need 'bars that are higher or lower or wider or narrower or straighter or angle back more.
I've not ridden it yet, but it does feel like I'm leaning forward more than I'm used to. I normally like an upright riding position, but you are then hanging on for dear life like a sail in the wind. Easy to change cars though, with standard type clamps etc.When I bought my Sprint 955i last year the guy I bought it off had fitted chunky foam handlebar grips which he said he fitted to all his bikes as they keep the vibes down. I think they can be had very cheap on eBay so providing you dont need heated grips they could be worth a try for small outlay?
I can't really comment as my biker before was an aircooled Ducati with dry clutch and very loud exhausts so was a bit vibey in general!
I can't really comment as my biker before was an aircooled Ducati with dry clutch and very loud exhausts so was a bit vibey in general!
Been out on the Bandit a few times, first time my right hand was numb in ten minutes, so started playing with grip and such forth. I found I was gripping the bar quite firmly, so tried different grips, just looping my hand round it, using body weight leaning on it to hold the throttle, worked quite well.
Anyway, yesterday I did 140 mile run out to Llangollen and back, in the rain...... and never even noticed a problem with my hand. I've put some 'superbike' bars with a 4" rise on the bike and it gives a good riding position. Lowest bars I have had on a bike in 30 years, but they feel okay.
Just need to work out how to stop my backside from aching so much after a couple of hours in the saddle now......
Anyway, yesterday I did 140 mile run out to Llangollen and back, in the rain...... and never even noticed a problem with my hand. I've put some 'superbike' bars with a 4" rise on the bike and it gives a good riding position. Lowest bars I have had on a bike in 30 years, but they feel okay.
Just need to work out how to stop my backside from aching so much after a couple of hours in the saddle now......

Harry H said:
This will go a long way to helping with the problem. I recently bought a BMW S1000 XR which are renowned for the vibes. Whilst mine wasn't that bad initially some heavier bar end weights removed the vibes completely.
I've also had a v twin Aprilia and bought some sexy bar ends to replace the originals that I always though were ungainly. The news ones were much lighter and slimmer, looked just the ticket. After one ride I soon realised why Aprilia had fitted the great big lumps of metal in the first place. And the new ones ended up in the bin.
I've also heard of people filling the bars with lead shot or sand to some effect although not tried this method personally as bar end weights take two mins to fit and cost little.
Get yourself a Throttle Mesiter (sp) its a bit of plastic that clips to the throttle that lets you rest your wrist on it when cruising. Have to be careful with them though as the wrong movement can see sudden acceleration when not required. Story for another day.
Would be good to know which end weights you bought Harry. Also which screen you went for. I've also had a v twin Aprilia and bought some sexy bar ends to replace the originals that I always though were ungainly. The news ones were much lighter and slimmer, looked just the ticket. After one ride I soon realised why Aprilia had fitted the great big lumps of metal in the first place. And the new ones ended up in the bin.
I've also heard of people filling the bars with lead shot or sand to some effect although not tried this method personally as bar end weights take two mins to fit and cost little.
Get yourself a Throttle Mesiter (sp) its a bit of plastic that clips to the throttle that lets you rest your wrist on it when cruising. Have to be careful with them though as the wrong movement can see sudden acceleration when not required. Story for another day.
Edited by Harry H on Friday 10th February 12:37
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


