Pitted discs
Author
Discussion

DuncsGTi

Original Poster:

1,185 posts

210 months

Friday 17th February 2017
quotequote all
I put my bike in the garage without rinsing it off and ended up not being able to move it for about 2 months. I got it out today and the brakes were quite sticky. I took it for a good run to clean them/ free them off and found quite bad pitting on both front discs under where the pads had been sat.

Will this have significantly weakened them? I just had a look at the price of replacements and Yamaha ones seem to be about £250 each redface


moto_traxport

4,265 posts

252 months

Friday 17th February 2017
quotequote all
No worries. I sometimes need to take a 5 yard run at my bike to move it after a wet & salty ride (yeah baby). I've had the bike (R1) for almost 10 years and it's still on it's first of discs at 51k miles.

Sebo

2,180 posts

257 months

Friday 17th February 2017
quotequote all
51k on an R1...nice work! What sort of service intervals ?

DuncsGTi

Original Poster:

1,185 posts

210 months

Friday 17th February 2017
quotequote all
moto_traxport said:
No worries. I sometimes need to take a 5 yard run at my bike to move it after a wet & salty ride (yeah baby). I've had the bike (R1) for almost 10 years and it's still on it's first of discs at 51k miles.
Mines on 23k so I assume original discs too.

The bike was quite wet/salty when I put it away then I proceeded to fall over skiing and break my shoulder so couldn't get it out of the garage to wash it. The brakes are not sticking at all and it slows smoothly with no vibration.

Jazoli

9,709 posts

281 months

Friday 17th February 2017
quotequote all
They'll be fine, just use it, unless you are a tart then change them.

DuncsGTi

Original Poster:

1,185 posts

210 months

Friday 17th February 2017
quotequote all
Jazoli said:
They'll be fine, just use it, unless you are a tart then change them.
Im certainly no tart, it comes out in all weather. As long as they're safe, Im happy wink

patchb

1,004 posts

145 months

Friday 17th February 2017
quotequote all
DuncsGTi said:
Mines on 23k so I assume original discs too.

The bike was quite wet/salty when I put it away then I proceeded to fall over skiing and break my shoulder so couldn't get it out of the garage to wash it. The brakes are not sticking at all and it slows smoothly with no vibration.
How are you finding riding after that? I broke my collarbone skiing in January and have ridden to work everyday this week (about 21 miles each way) feels so much nicer than trying to drive!

graham22

3,328 posts

236 months

Friday 17th February 2017
quotequote all
It's where the sintered particles in the pads have rusted to the disc.

Will probably clean up a little but may still be seen. The same happened to my Hayabusa but I did another 25k with no issues.

DuncsGTi

Original Poster:

1,185 posts

210 months

Friday 17th February 2017
quotequote all
patchb said:
How are you finding riding after that? I broke my collarbone skiing in January and have ridden to work everyday this week (about 21 miles each way) feels so much nicer than trying to drive!
To be honest, I find it easier than driving too, less rotation required. As soon as you pick up a little speed and the weight lifts of the wrists its actually quite comfortable.

moto_traxport

4,265 posts

252 months

Friday 17th February 2017
quotequote all
Sebo said:
51k on an R1...nice work! What sort of service intervals ?
Not sure about the oil changes influencing wear on the discs. It gets pads when it needs pads - I generally kill a set of carbon pads in 3 days on track so the discs have seen off a fair few sets of pads. I use sintered pads for road use.

I know it's history since 12k miles when it was a mint bike (we call them 'handbags' here when they're polished more than they're used) so reasonably sure they're the originals. Commuted on into London town 12k to 19k then euro tours and trackdayed up to present.

I've a few sets of wheels but they're my only good discs. Very minimal mileage on my wets (500 - 600 miles at a guess - one disc is bent so I know when I'm using them!) and the aweful orange wheels bought off Fleegle have only done about 300 miles this winter.

Biker's Nemesis

41,489 posts

239 months

Friday 17th February 2017
quotequote all
moto_traxport said:
Not sure about the oil changes influencing wear on the discs. It gets pads when it needs pads - I generally kill a set of carbon pads in 3 days on track so the discs have seen off a fair few sets of pads. I use sintered pads for road use.

I know it's history since 12k miles when it was a mint bike (we call them 'handbags' here when they're polished more than they're used) so reasonably sure they're the originals. Commuted on into London town 12k to 19k then euro tours and trackdayed up to present.

I've a few sets of wheels but they're my only good discs. Very minimal mileage on my wets (500 - 600 miles at a guess - one disc is bent so I know when I'm using them!) and the aweful orange wheels bought off Fleegle have only done about 300 miles this winter.
My old R1 has done around 10k miles on track on the standard disc's with EBC pads, I stopped checking them for wear after the first 5 years on track.

wildone63

1,048 posts

242 months

Saturday 18th February 2017
quotequote all
I had similar pitting on my discs and got an advisory for it when I had the bike mot tested.