Givi topbox interchangeability?
Discussion
I have a givi top box on my ER6 a bit like this one
>> https://www.sportsbikeshop.co.uk/motorcycle_parts/...
its quite flat and wide, so lots of litres, but only barely fits my smaller helmet , and won't fit the larger one because it's not quite deep enough
I think one that is a bit deeper and narrower might be more useful
like this
>> https://www.sportsbikeshop.co.uk/motorcycle_parts/...
my question is do they all use the same base? could I just buy the one above and assume it would click on onto the base I already have, given they are the same manufacturer?
>> https://www.sportsbikeshop.co.uk/motorcycle_parts/...
its quite flat and wide, so lots of litres, but only barely fits my smaller helmet , and won't fit the larger one because it's not quite deep enough
I think one that is a bit deeper and narrower might be more useful
like this
>> https://www.sportsbikeshop.co.uk/motorcycle_parts/...
my question is do they all use the same base? could I just buy the one above and assume it would click on onto the base I already have, given they are the same manufacturer?
You currently have a monokey box - this is the plate for it:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
the other one is monolock, this is the plate:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
Look for a box with monokey plate, sth like this:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
As far as I remember monolock ones are slitghly more budget, aimed at scooters/smaller bikes, monokey for bigger and sturdier boxes.
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
the other one is monolock, this is the plate:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
Look for a box with monokey plate, sth like this:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
As far as I remember monolock ones are slitghly more budget, aimed at scooters/smaller bikes, monokey for bigger and sturdier boxes.
OP As others have said as long as you identify the givi base plate you have monokey or monolock then you just need to ensure any topbox replacement has the correct fitting.
Monokey is their higher end fitting system this means in practice slightly higher weights can be carried and a greater choice of cases, panniers, topboxes - I had this system on my previous bike for topbox and panniers. Had two different sized topboxes over the almost 8 years I had the bike.
Monokey is their higher end fitting system this means in practice slightly higher weights can be carried and a greater choice of cases, panniers, topboxes - I had this system on my previous bike for topbox and panniers. Had two different sized topboxes over the almost 8 years I had the bike.
happyWanderer said:
You currently have a monokey box - this is the plate for it:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
the other one is monolock, this is the plate:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
Look for a box with monokey plate, sth like this:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
As far as I remember monolock ones are slitghly more budget, aimed at scooters/smaller bikes, monokey for bigger and sturdier boxes.
confirmed that I think I have a monokey system - so I think I should be good as long I buy something givi and monokey.https://www.sportsbikeshop.co.uk/motorcycle_parts/...
the other one is monolock, this is the plate:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
Look for a box with monokey plate, sth like this:
https://www.sportsbikeshop.co.uk/motorcycle_parts/...
As far as I remember monolock ones are slitghly more budget, aimed at scooters/smaller bikes, monokey for bigger and sturdier boxes.
This is what I have (sorry about the photo in the dark)
phatmanace said:
confirmed that I think I have a monokey system - so I think I should be good as long I buy something givi and monokey.
This is what I have (sorry about the photo in the dark)

Little tip Kappa is Givi by another name the two companies appear to be related . Go check the material and build quality in a dealer somewhere first and make sure you're happy that it's not quite up to Givi standard but will fit and be cheaper.This is what I have (sorry about the photo in the dark)
However and also my preference if you buy Givi do so from high rated Italian sellers on the eBay to save a stack of cash, if you DM/email me I'll give you the seller i used to buy my E55 Maxia 3 for way less than UK dealers.
sjtscott said:
phatmanace said:
confirmed that I think I have a monokey system - so I think I should be good as long I buy something givi and monokey.
This is what I have (sorry about the photo in the dark)

Little tip Kappa is Givi by another name the two companies appear to be related . Go check the material and build quality in a dealer somewhere first and make sure you're happy that it's not quite up to Givi standard but will fit and be cheaper.This is what I have (sorry about the photo in the dark)
However and also my preference if you buy Givi do so from high rated Italian sellers on the eBay to save a stack of cash, if you DM/email me I'll give you the seller i used to buy my E55 Maxia 3 for way less than UK dealers.

sjtscott said:
phatmanace said:
confirmed that I think I have a monokey system - so I think I should be good as long I buy something givi and monokey.
This is what I have (sorry about the photo in the dark)

Little tip Kappa is Givi by another name the two companies appear to be related . Go check the material and build quality in a dealer somewhere first and make sure you're happy that it's not quite up to Givi standard but will fit and be cheaper.This is what I have (sorry about the photo in the dark)
However and also my preference if you buy Givi do so from high rated Italian sellers on the eBay to save a stack of cash, if you DM/email me I'll give you the seller i used to buy my E55 Maxia 3 for way less than UK dealers.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


